Connecting to Power, With Grounded Plug

		5	CONNECTING TO POWER

		WITH GROUNDED PLUG:

			WARNING
	To reduce the risk of electrical shock, this
18	To reduce the risk of electrical shock, this
18	equipment has a grounded type plug that includes
	a third (grounding) pin. This plug will only fit a
	grounded type outlet. If you do not have a
	grounded type outlet. If you do not have a
	grounded outlet, contact a qualified electrician to
	install one. DO NOT alter the plug in any way. The
	door operator must be properly grounded in order
	to prevent personal injury and damage to
	the components.

			CAUTION
	Check local building codes to make sure that you
	are not required to have your garage door operator
	permanently wired, with circuit breaker protection.
	If permanent wiring is required, have this installed
	by a qualified electrician.

1.Plug the operator into a properly grounded electrical outlet.

2.Check Safe-T-Beam®alignment (Fig. 6-3).

WITH PERMANENT WIRING:

WARNING

The electrical power to the door operator MUST BE turned off when the motor cover is removed. Electrical power must remain off while making electrical connections.

1.Instructions for electrician.

•Remove power from circuit.

•Remove motor cover (Fig. 6-1).

–Removing hex head screw located in center on bottom of cover.

–Slide cover down and off.

•Remove and throw away existing power cord.

•Remove 7/8" knockout plug (Fig. 6-2).

–Install a suitable entrance bushing.

•Connect permanent wiring to power head.

–White to white/black to black / ground to green.

–Use only UL recognized wire nuts.

•Wires inside power head must be at least 6" in length.

CAUTION

The circuit board is light sensitive. Make sure the motor cover has been replaced prior to re-energizing the circuit.

•Replace motor cover and re-energize the circuit.

2.Check Safe-T-Beam®alignment (Fig. 6-3).

NOTE: The Genie Company is not responsible for charges resulting from work performed by an independent electrician.

FOR HELP-1.800.354.3643 OR GENIECOMPANY.COM

screw

FIG. 6-1 Removing motor cover.

knock-out plug

FIG. 6-2 Knock-out plug.

Safe-T-Beam®Alignment Check

After turning the electrical power on, if the STB’s are not in proper alignment, the red LED (Source) will blink continuously.

To correct the problem — the brackets are flexible and can be adjusted slightly to bring the system into alignment.

When the STB’s are in alignment the red LED will stop blinking and stay on.

FIG. 6-3

NOTE: If a problem exists with the STB that is preventing the door from closing, the door can be closed by holding the wall control button in until the door is fully closed. (The remote control will not work.)

GCG, H, PCG specifications

Genie PCG, H, and GCG represent a series of innovative computing devices designed to meet the diverse needs of modern users. Each model caters to specific requirements, yet they share common technological foundations that enhance performance, user experience, and energy efficiency.

The Genie PCG offers a powerhouse performance with its state-of-the-art processors and an emphasis on portability. It is designed for professionals and students who require a reliable device for multitasking, whether it’s for running demanding applications or standard productivity software. Equipped with a high-resolution display and a backlit keyboard, the PCG delivers an immersive visual experience and usability in low-light conditions. Its lightweight and slim design make it highly portable, making it easy to carry around without compromising performance.

On the other hand, the Genie H is specifically tailored for home users. It focuses on providing a seamless entertainment experience, equipped with integrated graphics and sound technologies that enhance media consumption. Whether you're streaming your favorite shows, playing games, or connecting with friends and family through video calls, the Genie H ensures superior visuals and crystal-clear audio. Its larger screen size complements its use as a central hub for home entertainment, featuring smart connectivity options that allow users to connect various devices effortlessly.

The Genie GCG is the advanced computing solution for gamers and tech enthusiasts. This model stands out with its high-performance graphics card and advanced cooling technology, ensuring optimal gaming performance even under heavy loads. The GCG is designed to handle the latest games, with high refresh rates and low latency delivering an immersive gaming experience. Its customizable RGB lighting and premium materials offer a stylish aesthetic that appeals to a wide range of users.

All three models utilize advanced connectivity options such as Wi-Fi 6 and Bluetooth 5.0, ensuring fast and stable connections. High-capacity batteries and power-efficient components enhance battery life across the series, allowing users to work or play for extended periods without interruption. With robust security features incorporated into the Genie devices, including biometric authentication and hardware encryption, users can feel confident in the safety of their data.

In summary, the Genie PCG, H, and GCG showcase the latest in technology and design, offering tailored experiences for professional, personal, and gaming use. Each model embodies the balance between cutting-edge performance and user-centric features, making them compelling choices in today's competitive computing landscape.