SAFE-T-BEAM System Installation | Genie GCG, H, PCG manual

3	SAFE-T-BEAM ® SYSTEM INSTALLATION	FOR HELP-1.800.354.3643 OR GENIECOMPANY.COM

WARNING

There should be no electrical power to the operator while installing Safe-T-Beam System® wires. If you have plugged in the power cord UNPLUG IT NOW.

NOTE: The operator will not close the door automatically unless the Safe-T-Beam®System is installed.

1.Mounting brackets.

•Mark both sides of garage door frame or wall 5" above floor. (Fig. 3-1).

•Hold bracket against door frame or wall.

–Check if brackets extend out from wall far enough, so tongue of bracket is beyond door, tracks or any door hardware.

–If not:

a. STB bracket extensions are available

at local dealer.

b.Blocks of wood, etc. may be substituted for extensions.

•Center bracket on your mark (Fig. 3-2).

•Fasten each with 2 screws (44) (Fig. 3-2).

[44]#10-16 x 1-1/4"

mark

FIG. 3-1 Mark door frame.



			tongue
	center of		tongue
	center of
	bracket


FIG. 3-2 Mount		FIG. 3-3 Attaching
brackets.		STB’s to brackets.

SUN

NOTE: Mounting brackets can be attached to the floor using concrete anchors (not provided).

2. Mounting STB source and sensor.	RED	GREEN	GREEN	RED RED	GREEN
2. Mounting STB source and sensor.	LED	LED	LED	LED LED	LED

•If garage has only one garage door.

– Determine which side of garage receives most

direct sunlight (Fig. 3-4).

ONE DOOR

TWO DOOR

– Red LED should always be on sunny side

GARAGE

•

whenever possible (Fig. 3-4).

For multiple doors.

– Preventing crossed signals is critical.

GREEN

RED RED

GREEN

RED

– Place source and sensor modules on adjacent

LED

LED LED

LED

doors facing in opposite directions (Fig. 3-4).

NOTE: To help prevent interference from sun, STB

THREE DOOR

sensors (Green LED) may be placed further away from

GARAGE

the door opening where they will spend more time

FIG. 3-4 STB locations.

in shadows.

•

Slide source/sensor onto tongue of bracket until

Dashed Line = striped wire

it clicks into place (Fig. 3-3).

Solid Line = white wire

3. Wiring.
•	Route wire (29) using either method shown	Green	Red	Green	Red
•	(Fig. 3-5).	Source	Sensor	Source	Sensor
•	Wires along rail are held in place with wire clips.
	[41]		Power		Power
			Head		Head
	– Wires can be slipped under the wire clips	A		B
	already in place.	FIG. 3-5 STB wiring methods.
		FIG. 3-5 STB wiring methods.

GCG, H, PCG specifications

Genie PCG, H, and GCG represent a series of innovative computing devices designed to meet the diverse needs of modern users. Each model caters to specific requirements, yet they share common technological foundations that enhance performance, user experience, and energy efficiency.

The Genie PCG offers a powerhouse performance with its state-of-the-art processors and an emphasis on portability. It is designed for professionals and students who require a reliable device for multitasking, whether it’s for running demanding applications or standard productivity software. Equipped with a high-resolution display and a backlit keyboard, the PCG delivers an immersive visual experience and usability in low-light conditions. Its lightweight and slim design make it highly portable, making it easy to carry around without compromising performance.

On the other hand, the Genie H is specifically tailored for home users. It focuses on providing a seamless entertainment experience, equipped with integrated graphics and sound technologies that enhance media consumption. Whether you're streaming your favorite shows, playing games, or connecting with friends and family through video calls, the Genie H ensures superior visuals and crystal-clear audio. Its larger screen size complements its use as a central hub for home entertainment, featuring smart connectivity options that allow users to connect various devices effortlessly.

The Genie GCG is the advanced computing solution for gamers and tech enthusiasts. This model stands out with its high-performance graphics card and advanced cooling technology, ensuring optimal gaming performance even under heavy loads. The GCG is designed to handle the latest games, with high refresh rates and low latency delivering an immersive gaming experience. Its customizable RGB lighting and premium materials offer a stylish aesthetic that appeals to a wide range of users.

All three models utilize advanced connectivity options such as Wi-Fi 6 and Bluetooth 5.0, ensuring fast and stable connections. High-capacity batteries and power-efficient components enhance battery life across the series, allowing users to work or play for extended periods without interruption. With robust security features incorporated into the Genie devices, including biometric authentication and hardware encryption, users can feel confident in the safety of their data.

In summary, the Genie PCG, H, and GCG showcase the latest in technology and design, offering tailored experiences for professional, personal, and gaming use. Each model embodies the balance between cutting-edge performance and user-centric features, making them compelling choices in today's competitive computing landscape.