ETTORE
INSTALLATION
–Place the appliance on a stable flat surface which is neither hot nor near a heat source. The surface must be dry. Keep the appliance and its mains cable out of reach of children.
–During use, do not place the base unit on a metal tray or a metal surface.
–Ensure that the voltage indicated on the rating plate of the appliance agrees with the mains voltage in your area. Connect the appliance only to a properly earthed power point with a minimum output of 6A. (Use a residual current device (RCD) seek the advice of an electrician.) While the appliance is in use, the mains plug must be accessible in case of an emergency. To ensure continued protection against risk of electric shock, connect to prop- erly grounded outlets only
–If the power point is unsuitable for accommodating the plug of your appliance, have the power point changed by a licensed electrician.
SAVE THESE INSTRUCTIONS
PARTS OF THE KETTLE
1Hinged lid
2Push button to open lid
3Water level gauge
4ON/OFF switch ON/OFF indicator light
5Base unit
6Cord retainer in base unit
7Max water level indicator
8Min water level indicator
9Scale filter
SPECIAL INSTRUCTIONS
POWER-SUPPLY CORD
–A short
–Extension cords are available and may be used if care is exercised in their use.
4