–If an extension cord is used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, if the appliance is of the grounded type, the extension cord should be grounding
SWITCHING OFF THE KETTLE MANUALLY
The ON/OFF switch (4) can also be used to switch off the kettle before the water boils.
SAFETY CUT-OFF
The kettle is protected against damage resulting from use with an insufficient volume of water. A safety
Should the kettle ever boil dry during operation, you must leave it to cool for 10 minutes before
BEFORE USING THE KETTLE
Clean the kettle before using it for the first time by filling it completely (to the MAX mark) with water, boiling the water, and then discarding the water.
HOW TO USE THE WATER KETTLE
FILLING THE WATER KETTLE
–Remove the appliance body from the base unit (5).
–Open the lid (1), fill with water and close the lid again.
Do not fill the kettle with less than 0.25l/8.5oz and not more than 1.7l/57oz (above the MAX mark), to prevent the kettle from boiling dry or boiling water escaping from the spout.
CONNECTION TO POWER SUPPLY
–After filling the kettle, position it on the base unit (5). Ensure that the kettle body is seated correctly on the contact unit on the base unit (5).
–Connect the mains plug to the power supply and press down the ON/OFF switch (4).
Note: Ensure that the ON/OFF switch is able to move freely.
Instruction for use
5