Refrigerator features
Utility compartment
The utility compartment can be placed in any position on the refrigerator door.
To remove:
1.Grasp both ends of compartment.
2.Lift compartment up and pull out.
To replace:
1.Insert compartment hooks into ladder slots on both sides of refrigerator door.
2.Push compartment down to lock into place.
Door bins
Door bins hold
To remove:
1.Grasp door bin.
2.Lift door bin up and pull out.
To replace:
1.Insert door bin hooks into ladder slots on both sides of refrigerator door.
2.Push door bin down to lock into place.
Gallon Door Bin
The gallon door bin holds several
Note: Positioning the gallon door bin directly across from an interior shelf or covered storage bin will prevent the refrigerator door from closing and could cause damage to bins and shelves.
To install:
1.Insert the attachment brackets into the adjustment slots on the door.
2.Push down on the bin to secure tabs.
3.If necessary, adjust interior shelves to allow for milk jugs and tall beverage containers stored in the gallon door bin.
SpillClean™
glass refrigerator shelves
Adjust the shelves to match the way you use your refrigerator.
IMPORTANT: Do not clean glass shelves with warm water when they are cold. Shelves may break if exposed to sudden temperature changes or impact. For your protection, tempered glass is designed to shatter into many small
To remove:
1.Tilt shelf up at front and lift shelf up at back.
2.Pull shelf straight out.
IMPORTANT: Glass shelves are heavy. Handle them carefully.
To replace:
1.Guide the rear shelf hooks into slots in the shelf supports on the back of the refrigerator wall.
2.Tilt shelf up at front until hooks drop into slots. Lower front of shelf to level position.
3.Check the stability of the shelf to be sure hooks have been inserted properly.
7