KitchenAid 2209477 manual ClearVue crispers, Humidity-controlled

Humidity-controlled

ClearVue™ crispers

The humidity-controlled crispers are designed to keep fresh vegetables and fruits longer. The Crisper Controls are located on the front of the crispers. The controls adjust the humidity (moisture) in the drawers. Slide control to “HIGH” for lettuce, cabbage and other produce that have leaves. Slide control to “LOW” for apples, corn and other produce that have skins.

The humidity-controlled crispers are interchangeable. The ClearVue section allows you to see into the crisper without opening them.

IMPORTANT: Occasionally, a food item may freeze in the FreshChill* Meat Locker, utility drawer, or crisper. When this occurs, turn the FreshChill Meat Locker Temperature Control to “cold.”

To remove crispers:

1.Roll drawer out to the stop.

2.Lift front of drawer and pull out the rest of the way.

To replace crispers:

1.Position drawer rollers between front roller of track and the track.

2.Push crisper up and onto track.

3.Slide crisper back until it stops.

To remove glass covers:

1.Lift right side of glass cover to free retainer and left side of cover.

2.Carefully remove glass cover.

To replace glass covers:

1.Place retainer on right side of glass cover.

2.Insert left side of glass cover into groove on left side of drawer.

3.Lower cover so that the retainer pins are in the guide holes on right side of drawer.

To remove ClearVue section:

1.Remove glass cover.

2.Slide ClearVue section down track, away from the retainer.

3.Replace in reverse order.

	TIL	IT	Y
U

						l
		ityC		ontroHIGH
Hum1	id	3	4
	2
LOW
						l
					on	tro
				C		HIGH
mid			ity	4
			3
Hu	1	2
W

9