FreshChill™
Meat Locker
The FreshChill Meat Locker is designed to provide colder storage temperatures than the average refrigerator temperature. The Meat Locker can be located in any set of ladder slots. For
IMPORTANT: If the meat locker is placed in any set of slots other than the second to last (bottom) set of ladder slots, the air supply hole must be sealed. Use the plug taped to the inside bottom of the meat locker to seal the air supply hole.
The rubber air connector (located on back of meat locker) directs air from the air supply hole into the meat locker. If the air connector comes off, replace it by pushing it into the square opening on back of meat locker.
To remove:
1.Roll meat locker out to the stop.
2.Lift front of meat locker slightly.
3.Pull meat locker out the rest of the way.
To replace:
1.Position meat locker rollers between front roller of track and the track.
2.Push meat locker up and onto track.
3.Slide meat locker back until it stops.
Setting the FreshChill™ Meat Locker Temperature Control
The FreshChill Meat Locker Temperature Control allows you to adjust the storage temperature of the FreshChill meat locker.
Cold air flows into the meat locker through an air duct between the freezer and the refrigerator. Setting the control allows more or less cold air through the air duct. Set the control to “Cold” to close the air duct.
IMPORTANT: If a food item freezes in the FreshChill Meat Locker, utility drawer, or crisper, turn the FreshChill Meat Locker Temperature Control to “Cold”. If the water dispenser stops working, water in the line may have frozen. If this happens, turn the FreshChill Meat Locker Temperature Control to “Cold”.
8