The oven light is a standard
To Replace:
1.Unplug range or disconnect power.
OvenLight
2.Turn the glass bulb cover in the back of the oven counterclockwise to remove.
3.Turn bulb counterclockwise to remove from socket.
4.Replace bulb, then bulb cover by turning clockwise.
5.Plug in range or reconnect power.
TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)
to possibly avoid the cost of a service call.
www.kitchenaid.com
In Canada, reference the Customer Service section at www.kitchenaid.ca.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
PROBLEM | POSSIBLE CAUSES | SOLUTIONS |
Nothing will operate | Power supply cord is unplugged. | Plug into a grounded 3 prong outlet. |
|
|
|
| Household fuse is blown or a | Replace the fuse or reset the circuit breaker. If the problem continues, |
| circuit breaker is tripped. | call an electrician. |
|
|
|
| Main or regulator gas shutoff | See the Installation Instructions. |
| valve is in the off position. |
|
|
|
|
| The range is improperly | Contact a trained repair specialist or see Installation Instructions. |
| connected to the gas supply. |
|
Surface burners will not | The control knob is not set |
operate | correctly. |
Push in knob before turning to a setting.
| Air in the gas lines | If this is the first time the surface burners have been used, turn on any | |
|
| one of the surface burner knobs to release air from the gas lines. | |
|
|
| |
| Clogged burner ports | See “Sealed Surface Burners” section. | |
|
|
| |
Surface burner flames are | Clogged burner ports | See “Sealed Surface Burners” section. | |
uneven, yellow and/or noisy |
|
| |
Burner caps positioned | See “Sealed Surface Burners” section. | ||
| |||
| improperly |
| |
|
|
| |
| Range converted improperly | If propane gas is being used, contact a service technician or see | |
|
| cover for contact information. |
Excessive heat around | Cookware that is not the proper |
cookware on cooktop | size |
The cookware should be centered above the burner with the bottom sitting level on the grate. The flame should be adjusted so that it does not extend up the sides of the pan.
Cooktop cooking results | Improper cookware | Ideal cookware should have a flat bottom, straight sides and a well |
not what expected |
| fitting lid, and the material should be of a medium to heavy thickness. |
|
|
|
| Control knob set to incorrect heat | See “Cooktop Use” section. |
| level |
|
|
|
|
| Range is not level | Level the range. See the Installation Instructions. |
18