KitchenAid W10118037B Connect Water Supply Line and Drain Hoses, B A A, C A B, A C B

Connect Water Supply Line and Drain Hoses

1. Connect water supply line to the water valve under the sink. Option 2: No waste disposer and drain air gap

B

A

A

A. Hot water supply

C

2.Slide clamps onto drain hoses (Figure A). Do not cut drain hoses.

3.Push hoses into Y drain connector until fully seated (Figure B). Several “clicks” will be heard.

4.Slide clamps into position (figures C and D).

A. Drain hose connector

B. Drain air gap

C. Waste

Option 3: Waste disposer and drain air gap

A	B
	A
	B
	C
C	D
	A. Drain hose connector
	B. Drain air gap
	C. Waste
	Option 4: No waste disposer, no drain air gap

5.Connect the drain hose using one of the following options:

Option 1: Waste disposer no drain air gap

C

A

B

A. For new construction, remove disposer plug.

B. Connect drain connector to waste disposer.

C. Tighten clamp.

A

C

B

A. Drain hose connector

B. Cut drain connector

C. Waste

NOTE: Attach the drain hose connector to the water waste line using the supplied hose clamp.

6.Turn on water and check for leaks.

11