4.From the Auto Steam - Poultry menu, you can input a variety of selections. The menu will display the default settings.
To change the temperature, input the desired temperature using the number keys.
5.To cook using the temperature probe, touch PROBE and enter the desired food temperature, using the number keys.
6.To change the level of browning, touch BROWNING.
Touch “plus” (+) or “minus”
7.Once the setup is complete, the start key will light up.
When settings are correct, touch START. You will be prompted to place the food in the oven and connect the temperature probe. Place the food in the oven, connect the temperature probe and touch OK.
8.Once the oven starts running, the Off key will light up. Touch OFF if you need to shut the oven off during cooking.
9.When the set probe temperature is reached, the Check Food message appears on the display. The probe temperature begins to blink and the end of cycle tone will sound.
Touch OK.
10.Touch OFF when finished cooking.
Always unplug and remove the temperature probe from the oven when removing food. The probe symbol will remain lit in the display until the probe is unplugged.
Settings
Your oven provides you with the ability to control several of the default settings and access information through the on screen display. These include; Sound, Display Contrast, Temp Format, Calibration, Water Filter, Learn Mode, Sabbath Mode, and Languages.
To access the Settings menu, see the following sections.
Sound(Tones)
Tones are audible signals, indicating the following:
One beep
■Valid key touch
■Function has been entered
One chime
■Preheat cycle has been completed
Two chimes
■End of a cooking cycle
Three beeps
■Invalid key touch
Four chimes
■When timer reaches zero
Includes using the Timer for functions other than cooking.
Tone Volume (Sound)
■The preset volume can be changed. On double ovens, you can change the sound from either display. Changing the sound on one display changes the sound for both ovens.
To Change:
1.From the Main menu, touch MORE.
2.Touch SETTINGS.
3.Touch SOUND.
4.To change the sound level, touch the + (plus) or - (minus) signs to increase or decrease to the desired level.
5.Touch OK.
NOTE: To turn the sound off touch - until the bar disappears to the left.
8