Frymaster BIELA14 manual Service Required Errors, Error Message, Explanation, 1-34

1.14.3 Service Required Errors

A SERVICE REQUIRED error alternating with YES displays on the computer. After YES is pressed the alarm is silenced. The computer displays an error message from the list below three times with the location of the error. Then the computer displays SYSTEM ERROR FIXED? YES/NO. If yes is chosen, enter code 1111. If NO is chosen the system returns to cook mode for 15 minutes then redisplays error until issue is fixed.

Pressing the MIB reset button during any filter function will generate a “SERVICE REQUIRED” error.

This is a list of the service required errors and causes.

ERROR MESSAGE	EXPLANATION
PUMP NOT FILLING	Oil not returning to	vat quickly. Possible
	problems: dirty pad, bad or missing O-rings,
	tripped or defective filter pump, actuators or
	linkage.
DRAIN VALVE NOT OPEN	Drain valve failed to open; the valve’s
	position is unknown.
DRAIN VALVE NOT CLOSED	Drain valve failed to close; the valve’s
	position is unknown.
RETURN VALVE NOT OPEN	Return valve failed to open; the valve’s
	position is unknown.
RETURN VALVE NOT CLOSED	Return valve failed to close; the valve’s
	position is unknown.
MIB BOARD	Problem with CAN communications; Check
	for loose CAN connections between
	computer and MIB board. MIB board failure
AIF BOARD	MIB detects AIF missing; AIF board failure
ATO BOARD	MIB detects ATO board connection lost;
	ATO board failure
HIGH LIMIT FAILURE	High limit circuit has an issue
AIF PROBE	AIF RTD reading out of range
ATO PROBE	ATO RTD reading out of range
TEMP PROBE FAILURE	TEMP Probe reading out of range
MIB SOFTWARE	Internal MIB software error
INVALID CODE LOCATION	SD card removed during update
MISCONFIGURED ENERGY TYPE	Energy type in fryer setup is incorrect. (ie.
	Set proper energy type gas or electric)
	Press 1234 to enter setup to properly
	configure fryer.
RTC INVALID DATE	The date is invalid.	Press 1234 to enter
	setup to properly configure fryer and set
	proper date.

1-34