Frymaster 8195915 operation manual Error Messages and Display Problems

Problem	Probable Causes	Corrective Action
Fryer heats until		Call FASC.
high limit trips	Contactor or controller has failed.
without heat
indicator ON.
Fryer stops heating		Determining which component has
	The high limit thermostat or	failed is beyond the scope of
with heat indicator
	contactor has failed.	operator troubleshooting. Call
ON.
		FASC.
6.2.2 Error Messages and Display Problems

Problem

Probable Causes

Corrective Action

		Verify that the drain valve is fully
		closed. The fryer will not function
Basket lift timer		if the drain valve is not fully
	Open drain valve or problem with	closed. If the drain valve is fully
display shows
	latching circuits	closed, the problem is within the
.
		latching circuitry and is beyond the
		scope of operator trouble shooting.
		Call FASC.
		This in an indication of a
Basket lift timer	Frypot temperature is more than	malfunction in the temperature
		control circuitry, including a
	410ºF (210ºC) or, in CE countries,
display shows .		failure of the high limit thermostat.
	395ºF (202ºC).
		Shut the fryer down immediately
		and call FASC.
Basket lift timer		This indicates a problem within the
	Problem with the temperature	temperature measuring circuitry
display shows	measuring circuitry including the	that is beyond the scope of
.	probe.	operator troubleshooting. Shut the
		fryer down and call FASC.
		CM III computers may be
CM III display is in		programmed to display in either
		Fahrenheit or Celsius. Refer to the
wrong temperature
	Incorrect display option programmed.	separate Frymaster Fryer
scale (Fahrenheit or
		Controllers User's Manual for
Celsius).
		instructions on changing the
		display.
		Verify that the drain valve is fully
		closed. The fryer will not function
CM III display		if the drain valve is not fully
	Open drain valve or problem with	closed. If the drain valve is fully
shows .	latching circuitry.	closed, the problem is within the
		latching circuitry and is beyond the
		scope of operator trouble shooting.
		Call FASC.

6-4