Getting to know your dishwasher

Getting to know your dishwasher	EN

Close-up view (control panel)

A	B
A ON-OFF Button	C Programme Indicator

BProgramme Button

Models explanation

Model	Colour

DW12-PFE1	White

DW12-PFE1ME	Silver

DW12-PFE1SS	Stainless Steel

You can select dishwasher with big handle or without big handle according to requirement.

Dishwasher interior

	e
a			j
			j
	c	f	k
		f
b	d	g	l
b	d	h
		i

a	Upper Rack	g	Salt Container Cap
b	Lower Rack	h	Washing Filter
c	Top Spray Arm	i	Detergent and Rinse Aid Dispenser
d	Silverware Basket	j	Water Inlet Hose (some models with “Aquastop”)
e	Third Sprayer	k	Drain Hose
f	Bottom Spray Arm	l	Power Supply Cord

How to fill the salt

Salt

The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils.

The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water.

Loading the salt into the container

Always use salt intended for use with dishwashers.

The salt container is located beneath the lower rack and should be filled as follows:

According to the “Water Hardness Tabel”, you can calculate the time of use , then load the salt .

Remove the lower rack and then unscrew and remove the cap from the salt container.

If you are filling the container for the first time, fill it with water.

Place the end of the funnel (supplied) into the hole and introduce about 2 kg of salt. It is normal for a small amount of water to come out of the salt container. Carefully screw the cap back on.

Important

To prevent the formation of rust, load the salt just

before beginning a wash cycle.

Adjusting salt consumption

The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of the water used. This is intended to optimize and cus- tomize the level of salt consumption so that it remains at a minimum.

To adjust salt consumption, proceed as follows:

Unscrew the cap from the salt container;

There is a ring on the container with an arrow on it (see figure to the side). If necessary, rotate the ring in an anticlockwise direction from the "-" set- ting towards the "+" sign, based on the hardness of the water being used.

It is recommended that adjustments be made in accordance with the following table:

	Water Hardness

					Selector	Salt	Autonomy
Level		Clarke	º dH			c o n s u m p t i o n	Autonomy
Level		Clarke	º dH	mmol/l		c o n s u m p t i o n	(cycles/2kg)
		degrees			position	(Grams/cycle)

1		014	MNT	MNIT	L	M	L

2		NQPS	NUQQ	NIUQIQ	=?J?	OM	SM

3		PSTN	QRUV	QIRUIV	jba	QM	QM

4		[TN	[UV	[UIV	?H?	SM	OR

DW12-PFE1 S, DW12-PFE1 ME specifications

The Haier DW12-PFE1 ME and DW12-PFE1 S are both innovative dishwashers designed to enhance kitchen functionality with their advanced features and technology. These models stand out in the crowded appliance market, offering performance, versatility, and convenience for modern households.

One of the key features of the DW12-PFE1 is its large capacity. With the ability to accommodate up to 12 place settings, it provides ample space for all your dishes, cutlery, and cookware. This makes it particularly suitable for families or for those who love to entertain guests. The adjustable racks and folding tines offer flexibility to optimize loading configurations based on your needs, ensuring that no item goes unwashed.

Both models are equipped with a highly efficient energy system, which not only conserves energy but also reduces water consumption. Operating at a low noise level, both dishwashers ensure a quiet environment, allowing you to enjoy your leisure time without disturbances during operation. The eco-friendly design adheres to energy efficiency standards, making these dishwashers an environmentally responsible choice.

In terms of washing performance, the Haier DW12-PFE1 ME and S models boast multiple wash programs to cater to different cleaning needs. From intensive cycles for heavily soiled pots and pans to quick washes for lightly soiled dishes, users can easily select the desired program for optimal results. The innovative soil sensor technology adjusts the wash cycle duration and intensity based on the level of dirt detected, ensuring thorough cleaning while conserving resources.

Both models feature a delay start option, enabling users to set the dishwasher to begin its cycle at a more convenient time. This feature is particularly useful for those who want to take advantage of off-peak electricity rates or wish to have dishes cleaned overnight.

Safety is also a priority with these dishwashers. They are equipped with a child lock feature to prevent accidental operation, plus overflow protection to minimize the risk of leaks. The sleek design and stainless-steel finish provide a modern aesthetic that can seamlessly fit into any kitchen decor.

In summary, the Haier DW12-PFE1 ME and DW12-PFE1 S dishwashers are versatile, energy-efficient, and user-friendly appliances, making them ideal for today's busy lifestyles. With their ample capacity, advanced cleaning technology, and safety features, they promise to deliver an excellent dishwashing experience while enhancing kitchen convenience and efficiency.