Installation Instructions
MOVING THE REFRIGERATOR
1LOADING THE REFRIGERATOR ONTO A HAND TRUCK
Leave all tape and door pads on doors until the refrigerator is in its final location.
To move the refrigerator, use a padded hand truck. Center the refrigerator on the hand truck and secure the strap around the refrigerator. DO NOT OVERTIGHTEN
THE STRAP.
2REMOVE THE BASE GRILLE
Remove the grille by removing the two Phillips head screws.
If the refrigerator must go through any entrance that is less than 38” wide, the doors must be removed. Proceed to Step 3.
DO NOT remove the handles.
If all entrances are more than 38” wide, skip to Installing the Refrigerator.
3DISCONNECT THE WATER COUPLING (on some models)
If the refrigerator has a water dispenser, there is a water line from the cabinet into the bottom hinge on the freezer door that must be disconnected.
To disconnect, push in on the white collar of the coupling and pull out the tubing.
White collar
Bottom freezer hinge
17