About ExpressChill.™(on some models) | GEAppliances.com |
Safety Instructions
How it Works
The ExpressChill™ feature is a system of dampers, a fan and a temperature thermistor.
The pan is tightly sealed to prevent the pan’s temperature from causing temperature fluctuations in the rest of the refrigerator.
The controls for this pan are located in the top of the refrigerator or on the dispenser with the temperature controls.
Operating Instructions
How to Use
Empty the pan. Place the Chill tray in the | finished, tap that feature’s pad |
pan. Place the items on the tray and close | until no options are selected and |
the pan completely. | the display is off. |
| Select the ExpressChill™ pad. On some |
| models, you can then select the chill time |
| (use chart to determine best setting). Other |
ExpressChill™ | models will only have one option (45 |
| minutes). On models with multiple settings, |
| tap the pad until the light appears next to |
| the desired setting. |
To stop a feature before it is
During ExpressChill,the display on the controls will count down the time
in the cycle.
How to Remove and Replace the Drawer
To remove:
Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock position.
Lift the front of the drawer up and out.
To replace:
Make sure all four swing locks are in the unlock position.
Place the sides of the drawer into the drawer supports, making sure the swing locks fit on the drawer slots.
Lock all four swing locks by rotating them to the lock position.
Installation Instructions Troubleshooting Tips
ExpressChill™ Chart
NOTE: Results may vary depending on packaging, starting temperature and other food traits.
Consumer
15Minutes
1 Beverage Can (12 oz)
2 Small Juice Boxes
30Minutes
2 to 6 Beverage Cans
(12 oz each)
2 Plastic 20 oz Bottles of Beverage
4 to 6 Small Juice Boxes
3 Foil Juice Packets
Wine (750 ml bottle)
45Minutes
2 Liters of Beverage
1/2 Gallon of Juice
5
Support