Bosch Appliances 800 Series manual Fault, Action, Cause

Fault

Possible

cause

Action

Program

does

not

start.

End time

selected

and activated.

None.

Appliance starts automatically.

"Real

Time

delay"

is

indicated

in

the

display

field.

Clock

cannot

be

set.

Program has already started; when a

program has

Wait

until program ends.

started, the

clock

cannot

be set.

"Set

clock:"

text

remains

inThe setting has switched from hours

to minutes; bothNone.

the display

field

even

selection

points have the

same text.

though theMenu

button

has

been

pressed.

No time displayed.

End time cannot be selected.

Time	not	set.	Set	time;	see	Page 15.
Time	not	set.	Set	time;	see	Page 15.
Program has already started; when a program has			Before starting				the program, select and start the desired
started, the end time can no longer be selected.			end time;		see		Page 22.

Spin

speed cannot

be

Spinning is already in progress; during

spin cycle theSelect

speed before

spinning.

selected.

speed cannot

be

changed.

Child

lock

cannot

be

The program

has

already

started.

Child

lock

can

be

selected in pause mode.

selected.

Detergent

residue

in the

Detergent was

damp or

lumpy.

Clean

and

dry

the

detergent dispenser; see Page 27.

detergent

dispenser.

Use the cap of the detergent bottle to measure liquid

detergents.

Water does not enter the machine or detergent is washed away.

"Water tap closed?" indicated in the display field.

Water cannot be seen in drum.

Washing solution has not drained completely. "Suds or blocked pump?" indicated in the display field.

Water is flowing out from underneath the machine.

Suds coming out of the detergent dispenser.

Repeated spinning.

Water

tap

not

turned on.

Turn

on

water tap.

Program

continues.

Supply hose kinked or pinched.

Eliminate

the

cause.

Strainers in supply hose clogged.

Clean the water inlet strainers; see Page 27.

Water

pressure

too

low.

Eliminate

the

cause.

This

is

not

a

fault.

The

water

level

is

below the visible part of the drum.

Suds

or pump

is

blocked

Use less detergent for future wash loads.

Detergents

specifically designed for your High Efficientcy washer

produce

fewer

suds and will include the

letters

•HE"

on

the

packaging.

Clean the water drainage

pipe

and/or

drain

hose.

The

thread

of

the supply hose is not tight.

Tighten

the

thread.

Leak in the drain hose.

Replace

the

drain hose.

Too much soap or non-HE soap used, pump could

Mix 1 tablespoon of fabric softener with(½1 litre)pt

of

remove

suds.

water and pour into detergent

dispenserI.

Use less detergent for future wash loads.

Detergents

specifically designed for you High Efficientcy washer

produce

fewer

suds and will

include the

letters

•HE"

on

the

packaging.

This

is

not

a

fault.

Always load the drum with andlarge small items

The imbalance compensation system is attempting to

together.

balance

the

load through repeated spins.

The laundry was

not spun. Large

items

of

clothing

have become

entangled and

couldAlways

load

the

drum

with

andlarge small

items

not be distributed evenly in the drum.

For reasons

oftogether.

safety the highaspeed spin cycle was automatically

suppressed.

Program duration

extended This

is

not

a

fault.

Add a

more

appropriate amount of detergent.

The suds detection feature has activated an additional

rinsing

cycle

to

reduce

the amount

of

suds.

This

is

not

a

fault.

Always

load

the

drum

with

andlarge small

items

The imbalance compensation system is attempting to together.

balance

the

load through repeated

spins.

30