O P E R AT I N G I N S T R U C T I O N S
SPECIAL FEATURES OF YOUR OVEN CONTROL
Your new touch pad control has additional features that you may choose to use. The following pages describe these features and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s memory until the steps are repeated.
When the display shows your choice, touch the START pad. The special features will remain in memory after a power failure.
How to set convection auto conversion function
When using convection bake and roast, the Convection Auto Conversion feature will automatically convert entered regular baking temperatures to convection baking temperatures.
This feature is activated so that the display will show the actual converted (reduced) temperature. For example, if you enter a regular recipe temperature of 350°F and press the START function, the display will show the converted temperature of 325°F.
Touch and hold the WARM/PROOF pad for 3 seconds. “AUTO” will appear in the display.
or | Touch the # 1 pad to ENABLE or |
touch the # 2 pad to DISABLE. |
Touch the START pad to accept the change.
How to adjust the oven thermostat
You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to become more familiar with it. If you still think your new oven is too hot or too cold, you can adjust the thermostat yourself.
Do not use thermometers,such as those found in grocery stores, to check the temperature setting of your oven. These thermometers may vary
NOTE:
This adjustment will not affect the broiling or the Self Clean temperatures. The adjustment will be retained in memory after a power failure.
The oven temperature can be increased (+) or decreased
NOTE:
Once the temperature is increased or decreased, the display will show the adjusted temperature until it is readjusted.
NOTE:
The thermostat adjustment for Bake will also affect Convection Bake or Convection Roast.
To Adjust the Oven Temperature
Touch and hold the WARM/PROOF pad for 3 seconds. “AUTO” will appear in the display.
Touch the WARM/PROOF pad 1 time and “Adj" will be displayed.
Using the number pad enter the temperature correction you wish to adjust.
For example, to adjust the oven temperature 15 degrees, touch 1 and 5.
Touch WARM/PROOF once to increase (+) or twice to decrease
Touch the START pad to accept the change.
20