M A I N T E N A N C E
REMOVING & REPLACING THE LIFT-OFF OVEN DOOR
CAUTION
•Be careful when removing and lifting the door.
•DO NOT lift the door by the handle.
-The door is very heavy.
To replace the door:
Step. 1
Firmly grasp both sides of the door at the top.
Step. 2
To remove the door:
Step. 1
Open the door fully.
Step. 2
Pull the hinge locks up toward the door frame to the unlocked position.
| Lock |
Slot | Unlock |
Hinge |
|
lock |
|
With the door at the same angle as the removal position, seat the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully seated into the bottom edge of the slot.
Hinge arm |
Bottom |
edge of |
slot |
Indentation |
Step. 3
Firmly grasp both sides of the door at the top.
Step. 3
Step. 4
about 5°
Open the door fully. If the door will not open fully, the indentation is not seated correctly in the bottom edge of the slot.
Close door to the door removal position, which is approximately 5 degrees.
Step. 5
Lift door up and out until the hinge arm is clear of the slot.
Step. 4
Push the hinge locks down against the front frame of the oven cavity to the locked position.
Step. 5
Close the oven door.
Hinge arm |
Hinge lock |
DOOR CARE INSTRUCTIONS
• Most oven doors contain glass that can break.
Read the following recommendations:
1.Do not close the oven door until all the oven racks are fully in place.
2.Do not hit the glass with pots, pans, or any other object.
3.Scratching, hitting, jarring, or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.
44