English
Guide To Features (Rear Panel):
9 | 7 | 4 | 5 | 6 | 3 | 1 | 2 | 8 |
1.FM ANTENNA SWITCH: Switch between internal and external FM antennas. If an external antenna is used, the switch should be in the External position. This switch has no affect on AM reception.
2.EXTERNAL FM ANTENNA INPUT: In most cases FM reception will be improved by sliding the included external FM antenna over this “F” connector and setting the antenna switch to External. To avoid damage, when removing the FM antenna, never pull it by the white cord. Always grasp the antenna’s black connector firmly and pull it straight out. For more, see the section marked “Reception”.
Figure 13
3.EXTERNAL AM ANTENNA INPUT: Connect the supplied external AM antenna’s 1/8" stereo male mini connector. Assemble the integrated base, (Figure 13) and adjust for best reception for each station. There will be no AM reception unless the AM antenna is connected.
For more, see the section marked “Reception”.
4.AUX IN: To hear audio from another device such as a TV or MP3 player, connect said device’s audio output to this stereo input and set the Source button to AUX. Switching to the Auxiliary position does not turn on the connected device. This stereo input accepts a 1/8" stereo male mini connector. Note you may need to adjust the volume level differently for an auxiliary device than the level used for radio or CD listening.
5.MIX IN: Connect your computer’s (or other device’s) audio output to this input to hear its audio mixed in with the tuner, CD, or auxiliary device if one is connected. The volume level of this input must be adjusted at the source. This input accepts a 1/8" male stereo mini connector.