Pitco Frialator 60149518 To Enter Factory Menu Level 4 for the Technician, Pitco Collect toggle

Page 30

Solstice I12+ Cooking Computer for ROV Fryers

Pitco P/N 60149517 & 60149518

9To Enter Factory Menu Level 4 (for the Technician):

With no cook timers running, displays will show one of the following displays:

Press right

, , or

The left display will show

.

.

. The

Enter password using the product keys as a numeric keypad

for entry.

Display will show

. Product key indicators

will illuminate to prompt operator to select a key. This section details parameters that may be changed in Level 4 programming.

9.1Pitco Collect (toggle)

With display showing

press product key L.

Display shows [PCOLLECT] [OFF

]. This toggle forces the RS-485 link to output

data collection parameters during test, and calibration. This has no meaningful use in the field. Do not change this setting. Factory shipped default is OFF.

To change this value, use the 0 key to select a new value.

Press

Display returns to

.

9.2

Offset Temperature Display:

 

 

 

With display showing

, press product key 1. See section 8.1 for

 

Offset Temperature Display.

 

9.3

Melt Cycle ON Time:

 

 

 

With display showing

, press product key 2. See section 8.2

for Melt Cycle ON Time.

9.4Minimum ON and OFF Cycle Time:

With display showing

, press product key 3. See section 8.3

for Minimum ON and OFF Cycle Time.

 

9.5Recovery Test Values:

With display showing

, press product key 4. See section 8.4

 

for Recovery Times.

 

 

9.6

Diagnostic Menu Entry:

 

 

 

With display showing

, press product key 5. See section 8.5

 

for Diagnostic Menu.

 

L22-378 Rev 3

Page 30 of 44

Page 29 Page 31
Image 30
Page 29 Page 31
Contents For Pitco P/N’s 60149517 Full Vat and 60149518 Split Vat Important Information for Future ReferenceFahrenheit or Celsius Display To Enter Programming Level 3 for the Technician To Exit Programming Level 5 Key Locations and Functions To turn the appliance onTo turn the appliance OFF To cancel a cook To check Actual and Set temperaturesTo start a cook Perform a Boil Out operation Automatic Boil Entry Water DetectionManual Boil Entry Oil Handling and Fryer Operations Fresh Oil Top-Off Manual FilteringFilter Control Option FDF Triggering Option Automated Filtering OptionAutomatic Filtering Automatic PolishingAutomatic Disposal Blocked DrainAdvanced Fryer Operations For Automated Filtering Option Full Vat/Left Return Pump Full Vat/Left Drain ValveFull Vat/Left Manual Top-Off Right Return Pump Split Vat OnlyRight Drain Valve Split Vat Only Filter Soon Right Manual Top-Off Split Vat OnlyControl Filter Lockout CFL Filter NowJIB Check/Error Fresh Oil Supply MonitoringJIB Oil Remaining Data Logging Using the product keys as a numeric keypad forFilter Data Function FDF Data Logging Data ViewingPage To Set Cook Temperature To Enter Programming Level 1 for the Store ManagerCook Time Hold Time Hold Pre-AlarmShake Time To Exit Level 1 programmingPassword Change or Required To Change Options Level 2 for the Store ManagerFahrenheit or Celsius Display Beeper Volume and Tone Language SelectionMelt Cycle Type Recovery Test Value Control or Timer Left side of Dual or Single VatControl or Timer Right side of Dual Vat Melt Cycle on Time Offset the Temperature DisplayTo Enter Programming Level 3 for the Technician Minimum on and OFF Cycle TimeRecovery Times Diagnostic Menu Entry Exit Diagnostic MenuReady Level Instant On Toggle Temperature Operating RangeMore Service Menu Entry Cook Now Cancel Duration Shake Alarm Duration Hold Alarm Duration Configuration ValueStanding Pilot Toggle Factory ResetExit More Service sub menu Flex Time ToggleFull Vat Fryer Basket n SettingNumber of Basket Lifts Split Vat Fryer LBASKETnTo Enter Factory Menu Level 4 for the Technician Offset Temperature DisplayRecovery Test Values Pitco Collect toggleTest On/Off High Limit ValueNumber of Basket Lift To Exit Factory Menu LevelTo Enter Filter Settings Menu Level 5 for the Store Manager Drain TimeFilter Time Filter Temperature Polish TimeFill Time Oil Level Probe/Auto Top-Off Enable Cook Counts AllowedCook Counts Deferred Auto Top-Off Time Filter Data Function EnableJIB Monitor Oil Remaining Enable More Filter Menu EntryMaximum JIB Time JIB Monitor Check/Fault EnableFilter Return Key Enable Low JIB TimeOn-Demand Top-Off Key Enable To Exit More Filter MenuOther Displays Mechanical Dimensions Electrical Connections at Left and Right connectors J1Left Inputs Type NominalOhms Probe Resistance ChartProbe Resistance in 5F Increments Probe ResistancePage Page L22-378 Rev
Top Page Image Contents