Pitco Frialator 60149518 To Enter Filter Settings Menu Level 5 for the Store Manager, Drain Time

Page 32

Solstice I12+ Cooking Computer for ROV Fryers

Pitco P/N 60149517 & 60149518

10To Enter Filter Settings Menu Level 5 (for the Store Manager):

Not all menu options will be available. Available menu options are determined by your fryer configuration and optional features.

With no cook timers running, displays will show one of the following displays:

, or

.

,

Press blank

The left display will show

. The right display will be

Enter

Level 5 Password
5	5	9	9

using the product keys as a numeric keypad for entry.

Display will show . Product key indicators will illuminate to prompt operator to select a key. This section details parameters that may be changed in Filter Configuration.

10.1Drain Time:

This adjustment controls the drain time for auto-filter operations FILTER, POLISH, and DISPOSE. This value should be selected to allow adequate time for the vat to completely drain into the filter pan before continuing the automatic process. Factory

Split – 0:20.

With display showing		, press product	
	Display shows	, where m:ss
	the vat will drain.
	To change this value, use the product keys for numeric entry
	value. Acceptable entry range is 0:20 to 4:00.

 Press

save entry. Display returns to

10.2Filter Time:

This adjustment controls the oil cycle time for filter operation FILTER. selected to allow oil to make multiple passes through the filter pan.

With display showing		, press product	
	Display shows	, where m:ss
	the vat will filter.
	To change this value, use the product keys for numeric entry
	value. Acceptable entry range is 00:00 to 99:59.

 Press

save entry. Display returns to

L22-378 Rev 3

Page 32 of 44

Image 32

Contents For Pitco P/N’s 60149517 Full Vat and 60149518 Split Vat Important Information for Future ReferenceFahrenheit or Celsius Display To Enter Programming Level 3 for the Technician To Exit Programming Level 5 To turn the appliance OFF Key Locations and FunctionsTo turn the appliance on To start a cook To cancel a cookTo check Actual and Set temperatures Manual Boil Entry Perform a Boil Out operationAutomatic Boil Entry Water Detection Filter Control Option Oil Handling and Fryer Operations Fresh Oil Top-OffManual Filtering FDF Triggering Option Automated Filtering OptionAutomatic Filtering Automatic PolishingAdvanced Fryer Operations For Automated Filtering Option Automatic DisposalBlocked Drain Full Vat/Left Return Pump Full Vat/Left Drain ValveRight Drain Valve Split Vat Only Full Vat/Left Manual Top-OffRight Return Pump Split Vat Only Right Manual Top-Off Split Vat Only Control Filter Lockout CFLFilter Soon Filter NowJIB Oil Remaining JIB Check/ErrorFresh Oil Supply Monitoring Using the product keys as a numeric keypad for Filter Data Function FDF Data LoggingData Logging Data ViewingPage Cook Time To Set Cook TemperatureTo Enter Programming Level 1 for the Store Manager Hold Pre-Alarm Shake TimeHold Time To Exit Level 1 programmingFahrenheit or Celsius Display Password Change or RequiredTo Change Options Level 2 for the Store Manager Melt Cycle Type Beeper Volume and ToneLanguage Selection Control or Timer Right side of Dual Vat Recovery Test ValueControl or Timer Left side of Dual or Single Vat Offset the Temperature Display To Enter Programming Level 3 for the TechnicianMelt Cycle on Time Minimum on and OFF Cycle TimeRecovery Times Ready Level Diagnostic Menu EntryExit Diagnostic Menu Temperature Operating Range More Service Menu EntryInstant On Toggle Cook NowShake Alarm Duration Hold Alarm DurationCancel Duration Configuration ValueFactory Reset Exit More Service sub menuStanding Pilot Toggle Flex Time Toggle Setting Number of Basket Lifts Full Vat Fryer Basket n Split Vat Fryer LBASKETnOffset Temperature Display Recovery Test ValuesTo Enter Factory Menu Level 4 for the Technician Pitco Collect toggleHigh Limit Value Number of Basket LiftTest On/Off To Exit Factory Menu LevelFilter Time To Enter Filter Settings Menu Level 5 for the Store ManagerDrain Time Fill Time Filter TemperaturePolish Time Cook Counts Deferred Oil Level Probe/Auto Top-Off EnableCook Counts Allowed Filter Data Function Enable JIB Monitor Oil Remaining EnableAuto Top-Off Time More Filter Menu EntryJIB Monitor Check/Fault Enable Filter Return Key EnableMaximum JIB Time Low JIB TimeOn-Demand Top-Off Key Enable To Exit More Filter MenuOther Displays Mechanical Dimensions Electrical Connections at Left and Right connectors J1Left Inputs Type NominalProbe Resistance Chart Probe Resistance in 5F IncrementsOhms Probe ResistancePage Page L22-378 Rev