Pitco Frialator 60149518 To start a cook, To cancel a cook, To check Actual and Set temperatures

Page 6

Solstice I12+ Cooking Computer for ROV Fryers Pitco P/N 60149517 & 60149518

1.3To start a cook:

When the display is showing

the appliance has reached set

temperature and is ready to cook. Press the desired product key, and place product into the vat. The indicator above the product key will flash to indicate cook timer is running. In the example above, product 4 is cooking with 2 and 28 seconds remaining. The right side display of the dual vat control

above, has no running cook timers, and shows

.

. While cooks are running, the displays will

remaining. Longer running cooks will flash

time remaining on these keys may be c

pressing a product key.

 

1.4To cancel a cook:

Press and hold the product key to cancel a running cook. If no other cooks

displays will return to

.

1.5To check Actual and Set temperatures:

To view the actual vat temperature, press the key. The display will show

or

, where “F” is Fahrenheit, and “C” is Celsius. After a few moments, the display

will return to

,

mm:ss] will display for any cooks still running.

, or

if no cooks are running. [Cn

To view the set temperature, press

twice. The display will show

or

, where “F” is Fahrenheit, and “C” is Celsius. After a few moments, the display will

return to running.

,

, or

, or, [Cn mm:ss] for any cook still

1.6To View Current Settings for Cook, Shake, Hold, and Hold Pre-Alarm:

To view the current settings for any product

 

by the desired

product key. The display will show [Cn

 

[Hn mm:ss], ending

with [Pn mm:ss]. Where “n” is the key

 

.

After a few moments, the display will return to

,

,

, or, [Cn mm:ss] for any cook still running.

Typical displays using key 4 as an example:

Key 4 Cook Time [C4] is set for 2 minutes and 28 seconds.

 

Key 4 Shake Time [S4] is set for 2 minutes and :00 seconds before the

 

of the Cook. Default value is 00:00, or inactive.

 

Key 4 Hold Time [H4] is set for 15:00 minutes. This is the amount of time cooked product may sit in holding bins before a new batch is started. Default value is 00:00, or inactive.

Key 4 Hold Pre-Alarm [P4] is set for 00:00 and is inactive (default setting). When activated his alarm warns the operators that the Hold Time is about to run out.

In a few moments, the display will return to

.

L22-378 Rev 3

Page 6 of 44

Page 5 Page 7
Image 6
Page 5 Page 7
Contents For Pitco P/N’s 60149517 Full Vat and 60149518 Split Vat Important Information for Future ReferenceFahrenheit or Celsius Display To Enter Programming Level 3 for the Technician To Exit Programming Level 5 Key Locations and Functions To turn the appliance onTo turn the appliance OFF To cancel a cook To check Actual and Set temperaturesTo start a cook Perform a Boil Out operation Automatic Boil Entry Water DetectionManual Boil Entry Oil Handling and Fryer Operations Fresh Oil Top-Off Manual FilteringFilter Control Option FDF Triggering Option Automated Filtering OptionAutomatic Filtering Automatic PolishingAutomatic Disposal Blocked DrainAdvanced Fryer Operations For Automated Filtering Option Full Vat/Left Return Pump Full Vat/Left Drain ValveFull Vat/Left Manual Top-Off Right Return Pump Split Vat OnlyRight Drain Valve Split Vat Only Filter Soon Right Manual Top-Off Split Vat OnlyControl Filter Lockout CFL Filter NowJIB Check/Error Fresh Oil Supply MonitoringJIB Oil Remaining Data Logging Using the product keys as a numeric keypad forFilter Data Function FDF Data Logging Data ViewingPage To Set Cook Temperature To Enter Programming Level 1 for the Store ManagerCook Time Hold Time Hold Pre-AlarmShake Time To Exit Level 1 programmingPassword Change or Required To Change Options Level 2 for the Store ManagerFahrenheit or Celsius Display Beeper Volume and Tone Language SelectionMelt Cycle Type Recovery Test Value Control or Timer Left side of Dual or Single VatControl or Timer Right side of Dual Vat Melt Cycle on Time Offset the Temperature DisplayTo Enter Programming Level 3 for the Technician Minimum on and OFF Cycle TimeRecovery Times Diagnostic Menu Entry Exit Diagnostic MenuReady Level Instant On Toggle Temperature Operating RangeMore Service Menu Entry Cook NowCancel Duration Shake Alarm DurationHold Alarm Duration Configuration ValueStanding Pilot Toggle Factory ResetExit More Service sub menu Flex Time ToggleFull Vat Fryer Basket n SettingNumber of Basket Lifts Split Vat Fryer LBASKETnTo Enter Factory Menu Level 4 for the Technician Offset Temperature DisplayRecovery Test Values Pitco Collect toggleTest On/Off High Limit ValueNumber of Basket Lift To Exit Factory Menu LevelTo Enter Filter Settings Menu Level 5 for the Store Manager Drain TimeFilter Time Filter Temperature Polish TimeFill Time Oil Level Probe/Auto Top-Off Enable Cook Counts AllowedCook Counts Deferred Auto Top-Off Time Filter Data Function EnableJIB Monitor Oil Remaining Enable More Filter Menu EntryMaximum JIB Time JIB Monitor Check/Fault EnableFilter Return Key Enable Low JIB TimeOn-Demand Top-Off Key Enable To Exit More Filter MenuOther Displays Mechanical Dimensions Electrical Connections at Left and Right connectors J1Left Inputs Type NominalOhms Probe Resistance ChartProbe Resistance in 5F Increments Probe ResistancePage Page L22-378 Rev
Top Page Image Contents