Solstice I12+ Cooking Computer for ROV Fryers
Pitco P/N 60149517 & 60149518
8.8.8Factory Reset:
Factory Reset provides a quick way to erase all setup changes and restore control to factory settings.
Warning: Any settings made prior to a factory reset will be lost. This includes customer specific downloads performed at Pitco Frialator. Heat profile after a reset is ROV2 for electric appliances.
With the display showing will be prompted to confirm the factory reset,
moments, the display will show [ P ]. Press
.
8.8.9Standing Pilot Toggle:
,press 8 product key. The operator key to continue. After a few
will return to
For some applications, it is desirable to maintain the gas pilot flame when the appliance is OFF. Heat from the pilot keeps solid shortening in the liquid state for quicker
Note: Heat Demand Profile (section 4.8.3) must be set to Generic 1, or
With the display showing
, press product key 9. Display will
show
press
[PILOT n], where “n” is ON or OFF. Use product key [0] change value, then
choice. Display returns to | . |
8.8.10 Flex Time Toggle:
With display showing | , press product key [0]. |
Display will show [FLEXTIME][xxx]. Where “xxx” is ON, OFF, SHRINK, or STRETCH. o “ON” – Both shrink time and stretch time are active.
o “OFF” – Both shrink time and stretch time are inactive.
o “SHRINK” – Only shrink time is active, cook times only shorten from setting.
o “STRETCH” – Only stretch time is active, cook times only lengthen from setting.
Use product key [0] change value, then press
Display returns to
.
choice.
8.8.11 Exit More Service sub menu:
With display showing | , |
Display will show | . Continue with Level 3 programming in this section (display |
showing [SERVICE]), or continue. |
|
Page 28 of 44 |