Pitco Frialator 60149518 Recovery Test Value, Control or Timer Left side of Dual or Single Vat

Page 22

Solstice I12+ Cooking Computer for ROV Fryers

Pitco P/N 60149517 & 60149518

7.6Recovery Test Value:

This controller maintains a record of heat up times for the appliance. A poorly running appliance will have increased recovery times stored in this display. There is no selection done here, just the display of recovery time values.

With display showing

, press the product key [0].

 Display will show

.

Press product key 6; display will show [RECOVERY] [TEST].

Press the product key [0]. Display will show [FnnnLyyy], where nnn is the factory recovery value, and yyy is the last warm- up recovery value.



After recording these values,

Display will again return to

.

7.7Control or Timer: (Left side of Dual or Single Vat):

With display showing	, press the product key [0].
 Display will show	.

Press product key 7; display will show [CONTROL].

Use the product key [0] to scroll through choices (Control, Timer).



save choice. Display shows

.



Note: If timer is selected, heat control outputs are disabled, leaving only the timer functions active. Do not make this selection on Solstice fryer models.

7.8Control or Timer: (Right side of Dual Vat):

Note: This key has no function on single vat control # 60149518.

With display showing

, press the product key [0].

 Display will show

.

Press product key 8; display will show [CONTROL].

Use the product key [0] to scroll through choices (Control, Timer).

 Press [P] key to save choice. Display shows

.



Note: If timer is selected, heat control outputs are disabled, leaving only the timer functions active. Do not make this selection on Solstice fryer models.

L22-378 Rev 3

Page 22 of 44

Image 22

Contents For Pitco P/N’s 60149517 Full Vat and 60149518 Split Vat Important Information for Future ReferenceFahrenheit or Celsius Display To Enter Programming Level 3 for the Technician To Exit Programming Level 5 To turn the appliance on Key Locations and FunctionsTo turn the appliance OFF To check Actual and Set temperatures To cancel a cookTo start a cook Automatic Boil Entry Water Detection Perform a Boil Out operationManual Boil Entry Manual Filtering Oil Handling and Fryer Operations Fresh Oil Top-OffFilter Control Option FDF Triggering Option Automated Filtering OptionAutomatic Filtering Automatic PolishingBlocked Drain Automatic DisposalAdvanced Fryer Operations For Automated Filtering Option Full Vat/Left Return Pump Full Vat/Left Drain ValveRight Return Pump Split Vat Only Full Vat/Left Manual Top-OffRight Drain Valve Split Vat Only Filter Soon Right Manual Top-Off Split Vat OnlyControl Filter Lockout CFL Filter NowFresh Oil Supply Monitoring JIB Check/ErrorJIB Oil Remaining Data Logging Using the product keys as a numeric keypad forFilter Data Function FDF Data Logging Data ViewingPage To Enter Programming Level 1 for the Store Manager To Set Cook TemperatureCook Time Hold Time Hold Pre-Alarm Shake Time To Exit Level 1 programmingTo Change Options Level 2 for the Store Manager Password Change or RequiredFahrenheit or Celsius Display Language Selection Beeper Volume and ToneMelt Cycle Type Control or Timer Left side of Dual or Single Vat Recovery Test ValueControl or Timer Right side of Dual Vat Melt Cycle on Time Offset the Temperature DisplayTo Enter Programming Level 3 for the Technician Minimum on and OFF Cycle TimeRecovery Times Exit Diagnostic Menu Diagnostic Menu EntryReady Level Instant On Toggle Temperature Operating RangeMore Service Menu Entry Cook NowCancel Duration Shake Alarm DurationHold Alarm Duration Configuration ValueStanding Pilot Toggle Factory ResetExit More Service sub menu Flex Time ToggleFull Vat Fryer Basket n SettingNumber of Basket Lifts Split Vat Fryer LBASKETnTo Enter Factory Menu Level 4 for the Technician Offset Temperature DisplayRecovery Test Values Pitco Collect toggleTest On/Off High Limit ValueNumber of Basket Lift To Exit Factory Menu LevelDrain Time To Enter Filter Settings Menu Level 5 for the Store ManagerFilter Time Polish Time Filter TemperatureFill Time Cook Counts Allowed Oil Level Probe/Auto Top-Off EnableCook Counts Deferred Auto Top-Off Time Filter Data Function EnableJIB Monitor Oil Remaining Enable More Filter Menu EntryMaximum JIB Time JIB Monitor Check/Fault EnableFilter Return Key Enable Low JIB TimeOn-Demand Top-Off Key Enable To Exit More Filter MenuOther Displays Mechanical Dimensions Electrical Connections at Left and Right connectors J1Left Inputs Type NominalOhms Probe Resistance ChartProbe Resistance in 5F Increments Probe ResistancePage Page L22-378 Rev