Pitco Frialator 60149517 Auto Top-Off Time, Filter Data Function Enable, More Filter Menu Entry

Page 35

Solstice I12+ Cooking Computer for ROV Fryers

Pitco P/N 60149517 & 60149518

10.9Auto Top-Off Time:

This adjustment selects the amount of time fresh oil is added to the vat during Auto Top-Off events. An event can only occur once every 3 minutes. Factory default: Full – 0:09, Split – 0:05.

With display showing , press product key [9].

Display shows , where m:ss is the time auto top-off will add oil to the vat per event.

To change this value, use the product keys for numeric entry of a new value. Acceptable entry range is 0:03 to 0:20.

Press

save entry. Display returns to

10.10Filter Data Function Enable:

This selection allows the enabling and disabling of the Filter Data Function feature.

With display showing , press product key [0].

Display shows , where xxx is either ON or OFF.

To change this value, use product key [0] to toggle between ON and OFF.

 Press	save entry. Display returns to
	.



10.11More Filter Menu Entry:

With display showing to	press product key [R] to enter submenu.
Display now shows	.

Product keys will illuminate where adjustments are permitted; all other keys are inactive. The following

section details each product key function in the

menu.

10.11.1 JIB Monitor (Oil Remaining) Enable

This selection allows the enabling and disabling of the JIB monitor for oil remaining feature.

With display showing , press product key [1].

Display shows , where xxx is either ON or OFF.

 Use product key [0] change value. Press

choice.

Display returns to .

Page 35 of 44

L22-378 Rev 3

Image 35

Contents Important Information for Future Reference For Pitco P/N’s 60149517 Full Vat and 60149518 Split VatFahrenheit or Celsius Display To Enter Programming Level 3 for the Technician To Exit Programming Level 5 To turn the appliance OFF Key Locations and FunctionsTo turn the appliance on To start a cook To cancel a cookTo check Actual and Set temperatures Manual Boil Entry Perform a Boil Out operationAutomatic Boil Entry Water Detection Filter Control Option Oil Handling and Fryer Operations Fresh Oil Top-OffManual Filtering Automated Filtering Option FDF Triggering OptionAutomatic Polishing Automatic FilteringAdvanced Fryer Operations For Automated Filtering Option Automatic DisposalBlocked Drain Full Vat/Left Drain Valve Full Vat/Left Return PumpRight Drain Valve Split Vat Only Full Vat/Left Manual Top-OffRight Return Pump Split Vat Only Filter Now Right Manual Top-Off Split Vat OnlyControl Filter Lockout CFL Filter SoonJIB Oil Remaining JIB Check/ErrorFresh Oil Supply Monitoring Data Viewing Using the product keys as a numeric keypad forFilter Data Function FDF Data Logging Data LoggingPage Cook Time To Set Cook TemperatureTo Enter Programming Level 1 for the Store Manager To Exit Level 1 programming Hold Pre-AlarmShake Time Hold TimeFahrenheit or Celsius Display Password Change or RequiredTo Change Options Level 2 for the Store Manager Melt Cycle Type Beeper Volume and ToneLanguage Selection Control or Timer Right side of Dual Vat Recovery Test ValueControl or Timer Left side of Dual or Single Vat Minimum on and OFF Cycle Time Offset the Temperature DisplayTo Enter Programming Level 3 for the Technician Melt Cycle on TimeRecovery Times Ready Level Diagnostic Menu EntryExit Diagnostic Menu Cook Now Temperature Operating RangeMore Service Menu Entry Instant On ToggleConfiguration Value Shake Alarm DurationHold Alarm Duration Cancel DurationFlex Time Toggle Factory ResetExit More Service sub menu Standing Pilot ToggleSplit Vat Fryer LBASKETn SettingNumber of Basket Lifts Full Vat Fryer Basket nPitco Collect toggle Offset Temperature DisplayRecovery Test Values To Enter Factory Menu Level 4 for the TechnicianTo Exit Factory Menu Level High Limit ValueNumber of Basket Lift Test On/Off Filter Time To Enter Filter Settings Menu Level 5 for the Store Manager Drain Time Fill Time Filter TemperaturePolish Time Cook Counts Deferred Oil Level Probe/Auto Top-Off EnableCook Counts Allowed More Filter Menu Entry Filter Data Function EnableJIB Monitor Oil Remaining Enable Auto Top-Off TimeLow JIB Time JIB Monitor Check/Fault EnableFilter Return Key Enable Maximum JIB TimeTo Exit More Filter Menu On-Demand Top-Off Key EnableOther Displays Mechanical Dimensions J1Left Inputs Type Nominal Electrical Connections at Left and Right connectorsProbe Resistance Probe Resistance ChartProbe Resistance in 5F Increments OhmsPage Page L22-378 Rev