Pitco Frialator 60149517 manual Shake Time, Hold Time, Hold Pre-Alarm, To Exit Level 1 programming

Page 19

Solstice I12+ Cooking Computer for ROV Fryers

Pitco P/N 60149517 & 60149518

6.2.2Shake Time:

Shake time is an alarm that sounds during Cook Time to prompt operators to shake the basket. Default for this value is zero, meaning the Shake Time is inactive. To use Shake Time, the time value must be a non-zero value, and, must be set to a value less than cook time.

Display shows [SHn mm:ss] where “n” is the key number, “SH” means Shake, and “mm:ss” is time in minutes and seconds.

Use the product keys for numeric entry to adjust the current

save shake time and continue setup for this product key.

Note: The value entered for shake time is the time from the end of the cook.

6.2.3Hold Time:

Cooked product may stand in holding bins for a period of time. This timer produces an alarm to inform operators to discard old product and start a new cook. Default for this value is zero, meaning the Hold Time is inactive.

Display is showing [HDn mm:ss], where “n” is the key number, “HD” means HOLD, and “mm:ss” is minutes and seconds.

Use the product keys for numeric entry to adjust the current

save hold time and continue setup for this product key.

6.2.4Hold Pre-Alarm:

Hold Pre-Alarm is a timer setting that is used to warn operators that the Hold Time is about to expire. To use Hold Pre-Alarm, the time value must be a non-zero value, and, must be set to a value less than Hold Time. Default value is zero, meaning the Hold Pre-Alarm is inactive.

Display is showing [PAn mm:ss] where “n” is the key number, “PA” means Pre-Alarm, and

“mm:ss” is minutes and seconds.

Use the product keys for numeric entry to adjust the current s

save pre-alarm time.

Note: Value entered for hold pre-alarm time is the time from the end of the hold period.

Display will again return to

2.2.2 to make changes to any other product keys or continue.

. Repeat steps from section

6.3To Exit Level 1 programming:

Display shows

Display shows

or,

.

.

. Continue to section 3 “To Change Options”,

To exit Level 1 programming,

Displays will show running.

,

.

, or

, when no active cooks are

Page 19 of 44

L22-378 Rev 3

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Important Information for Future Reference For Pitco P/N’s 60149517 Full Vat and 60149518 Split VatFahrenheit or Celsius Display To Enter Programming Level 3 for the Technician To Exit Programming Level 5 To turn the appliance on Key Locations and FunctionsTo turn the appliance OFF To check Actual and Set temperatures To cancel a cookTo start a cook Automatic Boil Entry Water Detection Perform a Boil Out operationManual Boil Entry Manual Filtering Oil Handling and Fryer Operations Fresh Oil Top-OffFilter Control Option Automated Filtering Option FDF Triggering OptionAutomatic Polishing Automatic FilteringBlocked Drain Automatic DisposalAdvanced Fryer Operations For Automated Filtering Option Full Vat/Left Drain Valve Full Vat/Left Return PumpRight Return Pump Split Vat Only Full Vat/Left Manual Top-OffRight Drain Valve Split Vat Only Filter Now Right Manual Top-Off Split Vat OnlyControl Filter Lockout CFL Filter SoonFresh Oil Supply Monitoring JIB Check/ErrorJIB Oil Remaining Data Viewing Using the product keys as a numeric keypad forFilter Data Function FDF Data Logging Data LoggingPage To Enter Programming Level 1 for the Store Manager To Set Cook TemperatureCook Time To Exit Level 1 programming Hold Pre-AlarmShake Time Hold TimeTo Change Options Level 2 for the Store Manager Password Change or RequiredFahrenheit or Celsius Display Language Selection Beeper Volume and ToneMelt Cycle Type Control or Timer Left side of Dual or Single Vat Recovery Test ValueControl or Timer Right side of Dual Vat Minimum on and OFF Cycle Time Offset the Temperature DisplayTo Enter Programming Level 3 for the Technician Melt Cycle on TimeRecovery Times Exit Diagnostic Menu Diagnostic Menu EntryReady Level Cook Now Temperature Operating RangeMore Service Menu Entry Instant On ToggleConfiguration Value Shake Alarm DurationHold Alarm Duration Cancel DurationFlex Time Toggle Factory ResetExit More Service sub menu Standing Pilot ToggleSplit Vat Fryer LBASKETn SettingNumber of Basket Lifts Full Vat Fryer Basket nPitco Collect toggle Offset Temperature DisplayRecovery Test Values To Enter Factory Menu Level 4 for the TechnicianTo Exit Factory Menu Level High Limit ValueNumber of Basket Lift Test On/OffDrain Time To Enter Filter Settings Menu Level 5 for the Store ManagerFilter Time Polish Time Filter TemperatureFill Time Cook Counts Allowed Oil Level Probe/Auto Top-Off EnableCook Counts Deferred More Filter Menu Entry Filter Data Function EnableJIB Monitor Oil Remaining Enable Auto Top-Off TimeLow JIB Time JIB Monitor Check/Fault EnableFilter Return Key Enable Maximum JIB TimeTo Exit More Filter Menu On-Demand Top-Off Key EnableOther Displays Mechanical Dimensions J1Left Inputs Type Nominal Electrical Connections at Left and Right connectorsProbe Resistance Probe Resistance ChartProbe Resistance in 5F Increments OhmsPage Page L22-378 Rev

60149517, 60149518 specifications

The Pitco Frialator 60149518 and 60149517 are two highly regarded models in the realm of commercial fryers, tailored to meet the rigorous demands of busy kitchens. Renowned for their reliability and advanced features, these fryers exemplify engineering excellence and culinary efficiency.

One of the standout characteristics of the Pitco Frialator models is their innovative design, which prioritizes efficient oil usage while enhancing the quality of fried foods. Both units are equipped with a patented “Oil Management System” that significantly extends oil life by reducing the rate of oxidation. This technology not only saves on oil costs but also ensures that food retains its flavor profile and quality, creating a better dining experience.

The fryers feature high-efficiency burners that provide quick heat-up times, ensuring that kitchen staff can deliver orders promptly. The 60149518 and 60149517 models are designed with adjustable temperature settings, allowing chefs to fine-tune cooking temperatures for different types of food. This versatility means that whether frying delicate seafood or hearty chicken, the equipment can accommodate various cooking requirements with ease.

User-friendliness is another hallmark of the Pitco Frialator line. Both models boast simple controls and an intuitive interface, enabling team members to operate the fryers without extensive training. Safety is also a priority; with features like a built-in temperature safety cut-off switch, the fryers help to prevent overheating, minimizing the risk of accidents in a bustling kitchen environment.

Moreover, the construction quality of the Pitco Frialator fryers stands out. Made with durable stainless steel, they are built to withstand the rigors of daily use, providing longevity and reliability for commercial applications. The fryers also include significant drainage and filtration systems that allow for easy oil changes and maintenance, streamlining kitchen operations.

In conclusion, the Pitco Frialator 60149518 and 60149517 are exemplary models that combine advanced technology, user convenience, and robust construction. With their energy-efficient features and commitment to food quality, these fryers remain a top choice for restaurants and foodservice operations looking to maximize efficiency and deliver outstanding fried foods.
Top Page Image Contents