Pitco Frialator L20-332 Initial Adjustments, Filling the Appliance, Lighting Instructions, On/Off

Page 12

INSTALLATION

1.8. INITIAL ADJUSTMENTS

After your appliance has been properly installed as described in the installation section of this manual, it will need to be adjusted to ensure that it will perform as designed. A qualified person must perform these adjustments.

To perform these adjustments the following tools will be needed:

Manometer

Digital Thermometer (Temperature Probe)

DC Microammeter

1.8.1.FILLING THE APPLIANCE

Refer to the following procedure to fill the cook tank prior to operation.

1.Ensure that the drain valve is closed.

2.Fill the tank with oil/shortening until the oil/shortening reaches the level line(s). Never let the oil/shortening level go below the MIN LEVEL mark stamped on the tank.

WARNING

Oil/shortening must completely cover the heat tubes at all times while appliance is on.

CAUTION

This appliance is not designed for cooking with water. Fill with oil/shortening only.

WARNING

During operation there is an open flame inside this appliance. The unit may get hot enough to set near by materials on fire. Keep the area around the appliance free from combustibles.

1.8.2.

LIGHTING INSTRUCTIONS

 

 

There is nothing to manually light on the electronic ignition system. Pilot ignition is performed and

controlled by the electronic ignition system. Refer to the following instructions to light the

appliance.

 

ON

 

1. Open the gas supply valves to the appliance.

 

 

 

2. Turn the gas valve knob to the ON position.

OFF

 

3. Turn the controller on.

 

 

 

Solid State Thermostat:

 

 

Assure the Melt switch is in the correct position.

 

 

Turn the I/0 (ON/OFF) switch to the I (ON) position

 

Solid State

 

 

 

Solid State Melt

Computer and Digital Control:

I/0 ON/OFF

Press the

* button to turn the controller on.

Switch

Switch

 

 

*The specified button may appear slightly different then shown. Refer to the operator’s manual for your appliance’s specific control type to determine the exact appearance of each button and display.

4. The main burners will light and be controlled by the thermostat.

8

L20-332, rev. 1 (05/11)

Image 12
Contents English To the PURCHASER, Owner and Store Manager Operation Features Specific to Models with Filters Model SG6H FryerANNUAL/PERIODIC Preventative Maintenance and Inspection Filtering with a Filter Drawer if EquippedReplacing the Filter Media if Equipped Control BOX & Electrical ComponentsSelf Cleaning Burner System not on ALL Models Accessories Description Checking Your NEW ApplianceSG6H SFSG6H Model SG6H Fryerinstallation Installation Clearances LEG/CASTER Installation and LevelingFuel Supply Line Leak and Pressure Testing GAS ConnectionQuick Disconnect Connection Installation CE GAS Table not Applicable to ALL ModelsElectrical Connections Ventilation and Fire Safety Systems InspectionInitial Adjustments Filling the ApplianceLighting Instructions ON/OFFOFF Main Burner System Adjustment Initial Cleaning Operational Features Self Cleaning Burner System if equipped Filter Pump Reset ButtonCook Tank Front Panel Drain Valve Handle Blue Shown in the closed positionFilling the Cooker Tank Tank Capacity ModelSG6H Filling the Tank with Liquid ShorteningModel SG6H Fryer Appliance Start UP Typical Timer Buttons CookingCooking Tips Fry Thickness 350F 360F 370FStandby Mode Appliance ShutdownComplete Shutdown Daily Preventative Maintenance Flush Hose Operation if EquippedPreventative Maintenance Appliance InspectionCleaning the Cook Tank Do not leave the appliance unattended during cleaningCleaning the Cabinet Filter Cleaning if EquippedMonthly Preventative Maintenance Boil OUT ProcedureTemperature Check Mechanical InspectionFilter System if Equipped Ventilation HoodPower Failure High Temperature LimitDrain Valve Interlock L20-332, rev 05/11 Troubleshooting Charts Fryer Troubleshooting ChartProblem Probable Causes Corrective Actions Filter Troubleshooting Chart if EquippedTroubleshooting Display Explanation ActionL20-332, rev 05/11

L20-332 specifications

The Pitco Frialator L20-332 is an exceptional commercial deep fryer designed for high-volume frying operations. Delivers reliability, efficiency, and advanced technology tailored for busy kitchens, this unit is a top choice for restaurants, cafes, and catering services. Its robust construction and innovative designs make it ideal for frying a variety of foods, from crispy French fries to golden chicken wings.

One of the standout features of the L20-332 is its high production capacity. With a generous 40 lbs. oil capacity per tank, the fryer is capable of supporting large batches, making it possible to keep up with customer demand during peak hours. The fryer is equipped with two fry tanks, providing a total oil capacity of 80 lbs., which allows chefs to prepare multiple items simultaneously, enhancing productivity and efficiency.

The Pitco Frialator L20-332 incorporates advanced heating technology that ensures even heating throughout the oil. This unit utilizes a highly efficient gas burner system that optimizes energy consumption while delivering consistent frying temperatures. The ability to quickly recover heat after food is added ensures that cooks maintain optimal frying conditions without significant temperature drops, which is crucial for achieving perfectly cooked food.

Additionally, this fryer features a durable stainless steel exterior that not only enhances its aesthetic appeal but also makes it easy to clean and maintain. The stainless steel construction resists rust and corrosion, ensuring longevity even in the busiest kitchen environments. Its adjustable legs allow for easy installation and adaptability to various kitchen layouts.

Safety is paramount in any commercial kitchen, and the L20-332 addresses this with effective features such as an integrated high-limit temperature control and a manual reset for safe operation. An easily accessible drain valve simplifies oil changes and maintenance, allowing for efficient cleaning routines.

Easy-to-use controls provide operators with precise temperature settings and cooking times, ensuring consistency and quality in every dish. The design of the fryer also includes a built-in filtration system that extends oil life and boosts the flavor of fried products, resulting in cost savings for the business.

In summary, the Pitco Frialator L20-332 is a powerful and reliable deep fryer equipped with advanced features designed for high-volume cooking. Its combination of efficient heating technology, user-friendly controls, and durable materials make it an ideal addition to any commercial kitchen looking to maximize productivity while delivering exceptional food quality.