Pitco Frialator L20-332 manual Filling the Cooker Tank, Tank Capacity Model, SG6H

Page 18

OPERATION

2.2. FILLING THE COOKER TANK

Both liquid and solid shortening can be used in this appliance, but liquid is preferred. If solid shortening is used it is recommended that you melt the shortening before adding it to the appliance. You can melt solid shortening in the appliance, but you must be very careful not to scorch the shortening.

 

 

Tank Capacity

 

 

 

 

 

 

 

Model

 

Capacity

 

 

SG6H

 

85 lbs. (38 kg)

 

 

 

 

 

 

CAUTION

This appliance is NOT designed for cooking with water. Fill with oil or shortening only.

2.2.1.FILLING THE TANK WITH LIQUID SHORTENING

To fill the tank with liquid shortening refer to the following procedure.

1.Ensure that the drain valve is completely closed and that there is no residual moisture in the tank.

2.Fill the tank with oil. You may fill the tank to the “MIN LEVEL” mark or slightly below the nominal level mark: the oil will expand slightly when it heats up, raising the level slightly.

2.2.2.FILLING THE TANK WITH SOLID SHORTENING

To fill the tank with solid shortening refer to the following procedure.

WARNING

NEVER melt blocks of solid shortening on top of the heat tubes This will cause a fire and could result in personal injury.

1.

Remove the tank rack.

 

 

2.

Cut the solid shortening

 

 

 

into cubes no larger than

 

 

 

one inch. ALWAYS pack

1.

Fill Line

 

the shortening below,

2.

Heat Tubes

 

between, and on top of the

3.

Solid Shortening

 

burner tubes. Do NOT

4.

Excessive Air Gaps

 

leave any large air gaps.

 

 

Use care when packing the solid shortening into the tank. Do NOT bend or break the temperature or high limit sensor probes. If these are damaged the appliance will not function properly.

3.Once the appliance tank is firmly packed with shortening, the shortening must be melted. Melt the shortening by cycling the

main burners on for 4 seconds and off for 30 seconds repeatedly, using the thermostat knob. If your appliance has a Melt Cycle option, use this to melt the shortening automatically.

WARNING

Oil/shortening must completely cover the heat tubes at all times while appliance is on.

14

L20-332, rev. 1 (05/11)

Page 17 Page 19
Image 18
Page 17 Page 19
Contents English To the PURCHASER, Owner and Store Manager Operation Features Specific to Models with Filters Model SG6H FryerReplacing the Filter Media if Equipped ANNUAL/PERIODIC Preventative Maintenance and InspectionFiltering with a Filter Drawer if Equipped Control BOX & Electrical ComponentsSelf Cleaning Burner System not on ALL Models Accessories Description Checking Your NEW ApplianceSG6H SFSG6H Model SG6H Fryerinstallation Installation Clearances LEG/CASTER Installation and LevelingFuel Supply Line Leak and Pressure Testing GAS ConnectionQuick Disconnect Connection Installation CE GAS Table not Applicable to ALL ModelsElectrical Connections Ventilation and Fire Safety Systems InspectionLighting Instructions Initial AdjustmentsFilling the Appliance ON/OFFOFF Main Burner System Adjustment Initial Cleaning Operational Features Cook Tank Front Panel Self Cleaning Burner System if equippedFilter Pump Reset Button Drain Valve Handle Blue Shown in the closed positionSG6H Filling the Cooker TankTank Capacity Model Filling the Tank with Liquid ShorteningModel SG6H Fryer Appliance Start UP Cooking Tips Typical Timer ButtonsCooking Fry Thickness 350F 360F 370FStandby Mode Appliance ShutdownComplete Shutdown Daily Preventative Maintenance Flush Hose Operation if EquippedPreventative Maintenance Appliance InspectionCleaning the Cabinet Cleaning the Cook TankDo not leave the appliance unattended during cleaning Filter Cleaning if EquippedMonthly Preventative Maintenance Boil OUT ProcedureTemperature Check Mechanical InspectionFilter System if Equipped Ventilation HoodPower Failure High Temperature LimitDrain Valve Interlock L20-332, rev 05/11 Problem Probable Causes Corrective Actions Troubleshooting ChartsFryer Troubleshooting Chart Filter Troubleshooting Chart if EquippedTroubleshooting Display Explanation ActionL20-332, rev 05/11

L20-332 specifications

The Pitco Frialator L20-332 is an exceptional commercial deep fryer designed for high-volume frying operations. Delivers reliability, efficiency, and advanced technology tailored for busy kitchens, this unit is a top choice for restaurants, cafes, and catering services. Its robust construction and innovative designs make it ideal for frying a variety of foods, from crispy French fries to golden chicken wings.

One of the standout features of the L20-332 is its high production capacity. With a generous 40 lbs. oil capacity per tank, the fryer is capable of supporting large batches, making it possible to keep up with customer demand during peak hours. The fryer is equipped with two fry tanks, providing a total oil capacity of 80 lbs., which allows chefs to prepare multiple items simultaneously, enhancing productivity and efficiency.

The Pitco Frialator L20-332 incorporates advanced heating technology that ensures even heating throughout the oil. This unit utilizes a highly efficient gas burner system that optimizes energy consumption while delivering consistent frying temperatures. The ability to quickly recover heat after food is added ensures that cooks maintain optimal frying conditions without significant temperature drops, which is crucial for achieving perfectly cooked food.

Additionally, this fryer features a durable stainless steel exterior that not only enhances its aesthetic appeal but also makes it easy to clean and maintain. The stainless steel construction resists rust and corrosion, ensuring longevity even in the busiest kitchen environments. Its adjustable legs allow for easy installation and adaptability to various kitchen layouts.

Safety is paramount in any commercial kitchen, and the L20-332 addresses this with effective features such as an integrated high-limit temperature control and a manual reset for safe operation. An easily accessible drain valve simplifies oil changes and maintenance, allowing for efficient cleaning routines.

Easy-to-use controls provide operators with precise temperature settings and cooking times, ensuring consistency and quality in every dish. The design of the fryer also includes a built-in filtration system that extends oil life and boosts the flavor of fried products, resulting in cost savings for the business.

In summary, the Pitco Frialator L20-332 is a powerful and reliable deep fryer equipped with advanced features designed for high-volume cooking. Its combination of efficient heating technology, user-friendly controls, and durable materials make it an ideal addition to any commercial kitchen looking to maximize productivity while delivering exceptional food quality.
Top Page Image Contents