WATER SUPPLY
∙Take the lid off the water tank (ref.27) and take out the Brita filter.
∙Take the filter out of the packaging and soak it in cold water for half an hour before fitting it firmly into the hole in the tank (fig.6).
∙Place the water hose in the relative channel (fig.7) and push it down until it reaches the bottom of the tank (fig.8).
∙Fill the tank with cold water.
∙Warning: fill the tank with cold drinking water
only: do not pour milk or any other liquid into the tank!
∙The Brita filter is available at shops selling household appliances, at our Technical Service Centres and at Authorised Spare Parts outlets.
Fig. 6
Fig. 7
Fig. 8
67