Zanussi ZCOF 637 X instruction manual Electrical Connection

ELECTRICAL

CONNECTION

∙Make sure that the electric circuit is suitably earthed.

∙Connect the power cable supplied to the connector on the back of the appliance, plug the connector into the power supply unit on the back of the post (fig.3) where you will find the terminal board (fig.9) set to operate at a supply voltage of 230V monophase.

∙Make sure that a circuit breaker is installed in the electrical circuit of the building to disconnect it from mains and that contacts are at least 3mm apart.

∙WARNING: the supplier disclaims all responsibility in the case of non-observance of the above rule.

Fig. 9

68