INSTALLATION
INSTALLATION | HEAVY DUTY COUNTERLINE |
Step 2c: Installation on Insulated Base
The appliance may be installed onto a flat
1.Attach the side pieces of the insulated base (items “A” in Figure 7 below) to the front piece (item “B”) using the four sheet metal screws provided.
2.Position the insulated base on the surface where you want the appliance to be located.
3.Position the appliance on top of the insulated base. Lift the appliance only from the ends, never from the middle!
4.Go on to Step 4 on page 18.
Figure 7
A
B
PAGE 12 | OWNER’S MANUAL 1182845 REV 8 |