Falcon U109635-02 Clock, Setting the time of day, To stop the ovens at a specific time of day

Page 10

Australia

The Clock

This must be set before the ovens will work.

Setting the time of day

ticks down. To stop the beeper when it sounds, turn the Adjusting knob anticlockwise.

To stop the ovens at a specific time of day

Turn the Timer knob to the ( ) position.

 

 

 

 

 

Use the Adjusting knob to set the time at which the

 

 

 

 

 

ovens are to stop. You can set the ovens to turn on

 

 

 

 

 

at any time over the following 24 hour period. AUTO

 

Timer knob

 

 

Adjusting knob

shows in the display:

 

When the clock is first connected, the display flashes

 

 

 

(

) and (

) alternately.

 

 

 

To set the time, turn and hold the Timer knob to

 

 

 

the clock symbol (

 

) and at the same time turn the

 

 

 

 

 

 

 

Adjusting knob left or right until the clock shows the

 

 

 

time of day. Remember this is a 24-hour clock. Let go

 

 

 

of the Timer knob and it will spring back to the vertical,

Turn the Timer knob to the bottom ‘Auto’ setting. Once

oven manual setting.

 

The following sections show you how to use the

the set time is reached, the beeper sounds. Turn the

Timer knob to the vertical (

) to return to manual

various clock functions, which apply to both

cooking.

 

ovens simultaneously. If both ovens are cooking

To start and then stop the ovens using

automatically using the timer, you can control them

individually using the different oven temperature

the Timer

 

knobs.

 

 

 

Before you set the clock, decide on both the ‘cook time’,

 

 

 

 

 

Minute Minder

 

which is the period of time you want the oven to cook,

 

and the ‘stop time’, which is the time of day at which you

This function acts as a reminder, setting a beeper to

want the oven to stop cooking.

sound after a set number of minutes. Turn the Timer

You cannot set a start time directly - this is set

knob to the right to the (

) minute minder setting - it

automatically by a combination of the 'cook time'

should click into position:

 

 

and 'stop time'.

 

 

 

 

 

 

 

 

 

 

 

 

Turn the Timer knob to the (

) position:

Use the Adjusting knob to set the time you need as below:

Use the Adjusting knob to set the ‘cooking time’ you need:

You can either turn the knob back to the vertical manual setting () to keep an eye on the time of day,

or leave it in the ( ) minute minder position as the time10

Image 10
Contents User Guide for Australia Contents Before you start Cleaning This appliance is heavy, so take care when moving itCooker Overview Hotplate Burners Griddle High/medium Wok CradleMedium/low Never close the grill door when the grill is on Glide-out GrillLeft Hand Oven OvensRight Hand Tall Oven Clock Setting the time of dayTimer To stop the ovens at a specific time of dayAuto is showing, but you want to revert to manual cooking Multi-Function OvenKey Lock Multi-Function Oven Functions Pre-heat this function before cookingTips on Cooking with the Timer Handyrack Main OvenOven Cooking chart Conventional and Fan Ovens FishOven Shelves General Oven TipsLeft Hand Main Oven Hotplate Burners Cleaning your CookerMain Oven Light Essential InformationMain Oven GrillControl Panel and Doors Wok CradleTroubleshooting Tall OvenHotplate ignition or hotplate burners faulty Hotplate burners will not lightOut of Warranty Service and SparesIf you have a problem Please noteInstallation Overhead Measurement a Side clearances Measurements B & CLowering the Two Rear Rollers Unpacking the CookerMoving the Cooker Side clearances Measurement ELevelling Repositioning the Cooker following ConnectionConversion to LP Fitting the Handles and Front HandrailFitting the Splashback Fitting the Stability BracketGas Connection Fitting the Restraining ChainConversion from Natural Gas to LP Gas Pressure testing for Natural GasTap Adjustment JetsElectrical Connection Propane Pressure TestingStick on label Customer Care Oven CheckFitting the Plinth Thank youServicing Notes To Change a Hotplate Tap To Replace a ThermostatTo Replace the Grill Controller To Replace a Hotpate Burner JetTo Change the Main Oven Door Catch To Replace an Oven Fan To Change Ignition GeneratorTo Remove an Oven Inner Back To Replace an Oven Fan ElementTo Adjust the Main Oven Door Angle Top ElementCircuit Diagram Technical Data Australia Australia Australia