|
|
|
| Australia |
A | inner burner cap, | B | outer burner cap | When refitting the grill pan, ensure that the wide rim is |
C | inner burner head | D | outer burner head | at the front: |
E | Wok burner base |
|
|
|
When
Turn the head until the ‘D’ matches the one on the burner base. Turn the head over and place it on the burner base.
To fit the small inner burner, find the larger electrode notch in the burner rim. Line this up with the white ignition electrode and place the inner burner on the large base ring.
A electrode notch | B | ignition electrode |
Now fit the two burner caps, ensuring that they are seated properly.
The Wok Cradle
Recommended cleaning materials are hot soapy water, a moistened soap pad, cream cleaner or a nylon scourer.
Grill
Before you remove any of the grill parts for cleaning. ensure that they are cool, or use oven gloves.
The grill pan and grill pan carriage can be easily removed for cleaning.
The grill pan and grid should be washed in hot soapy water, or using our recommended Rangemaster cleaning solution.
After grilling meats or any foods that soil, leave to soak for a few minutes in the sink immediately after use. Stubborn particles may be removed from the grid by using a nylon brush.
Control Panel and Doors
Avoid using any abrasive cleaners, including cream cleaners, on brushed Stainless Steel surfaces. For best results, use a liquid detergent.
The control panel and knobs, and doors, should only be cleaned with a soft cloth wrung out in clean hot soapy water. After cleaning, polish with a dry cloth.
The Main Oven
The Main oven has panels which have been coated with a special enamel that partly cleans itself. This does not stop all marks on the lining, but helps to reduce the amount of manual cleaning needed.
The Cook & Clean panels work better above 200°C. If you do most of your cooking below this temperature, occasionally remove the panels and wipe with a lint free cloth and hot soapy water. The panels should then be dried and replaced and the oven heated at 200°C for about one hour. This will ensure that the Cook & Clean panels are working effectively.
Don’t use steel wool, oven cleaning pads, or any other materials that will scratch the surface.
Removing the Main Oven Linings
Some of the lining panels can be removed for cleaning. You will need to remove the shelves before removing the panels.
Each side of the oven is fixed with four fixing screws. You don’t have to remove the screws to remove the oven linings. Simply lift each side panel upwards and they will slide off the screws. Then pull them forwards:
Once the linings are removed, the oven enamel interior can be cleaned.
17