Falcon U109635-02 manual Wok Cradle, High/medium, Medium/low

Page 7

Australia

Always leave space around the griddle for the gases to escape. Never fit two griddles side by side. Large pans should also be spaced well apart.

Use the following heat settings as a guide for griddle cooking.

High/medium:

Drop scones, Bacon, Chops, Steak, Burgers.

Medium/low:

Potato cakes, Eggs, Fish cakes.

Experience will soon familiarise you with the correct setting to use for cooking.

After cooking, allow the griddle to cool before cleaning.

The Wok Cradle

The cradle should be used on the triple ring Wok burner only.

When you fit the cradle, check that the Wok is properly located on the front and rear fingers and that it is supported properly on a pan support.

Make sure the cradle is stable and that the Wok is sitting level in the ring.

The cradle will get very hot in use - allow plenty of time for it to cool before you pick it up.

The Wok cradle is designed to fit a Professional 35cm Wok (available from our cookware collection - Part Code RM095).

If you use a different Wok make sure that it fits the cradle. Woks vary very widely in size and shape. It’s important that the Wok sits down on the pan support

-but if the Wok is too small the cradle will not support it properly.

7

Image 7
Contents User Guide for Australia Contents Before you start This appliance is heavy, so take care when moving it CleaningCooker Overview Hotplate Burners Griddle High/medium Wok CradleMedium/low Glide-out Grill Never close the grill door when the grill is onLeft Hand Oven OvensRight Hand Tall Oven To stop the ovens at a specific time of day Setting the time of dayTimer ClockAuto is showing, but you want to revert to manual cooking Multi-Function OvenKey Lock Pre-heat this function before cooking Multi-Function Oven FunctionsHandyrack Main Oven Tips on Cooking with the TimerFish Oven Cooking chart Conventional and Fan OvensOven Shelves General Oven TipsLeft Hand Main Oven Essential Information Cleaning your CookerMain Oven Light Hotplate BurnersWok Cradle GrillControl Panel and Doors Main OvenTall Oven TroubleshootingHotplate burners will not light Hotplate ignition or hotplate burners faultyPlease note Service and SparesIf you have a problem Out of WarrantyInstallation Side clearances Measurements B & C Overhead Measurement aSide clearances Measurement E Unpacking the CookerMoving the Cooker Lowering the Two Rear RollersFitting the Handles and Front Handrail Repositioning the Cooker following ConnectionConversion to LP LevellingFitting the Stability Bracket Fitting the SplashbackFitting the Restraining Chain Gas ConnectionJets Pressure testing for Natural GasTap Adjustment Conversion from Natural Gas to LP GasElectrical Connection Propane Pressure TestingStick on label Thank you Oven CheckFitting the Plinth Customer CareServicing Notes To Replace a Hotpate Burner Jet To Replace a ThermostatTo Replace the Grill Controller To Change a Hotplate TapTo Change the Main Oven Door Catch To Replace an Oven Fan Element To Change Ignition GeneratorTo Remove an Oven Inner Back To Replace an Oven FanTop Element To Adjust the Main Oven Door AngleCircuit Diagram Technical Data Australia Australia Australia