Falcon U109635-02 Hotplate ignition or hotplate burners faulty, Hotplate burners will not light

Page 19

Australia

Before removing the existing bulb, turn oﬀ the power supply and ensure that the oven is cool. Open the oven door and remove the oven shelves.

Locate the bulb cover and unscrew it by turning it anticlockwise (it may be very stiﬀ):

Now unscrew the existing bulb anticlockwise, taking care to protect your ﬁngers with a glove in case the bulb should shatter.

Screw in the new bulb clockwise and then screw the bulb cover back on. Turn on the electricity supply and check that the bulb now lights.

Hotplate ignition or hotplate burners faulty

Is the power on? Is the clock illuminated? If not, there maybe something wrong with the power supply.

Are the sparker (ignition electrode) or burner slots blocked by debris?

Are the burner trim and caps correctly located (see the section on ‘Cleaning your Cooker’)?

Hotplate burners will not light

Make sure that the burner parts have been replaced correctly after wiping or removing for cleaning.

Check that there is not a problem with your gas supply. You can do this by making sure that other gas appliances you may have are working.

Do the burners spark when you push the button? If not, verify that the power is on by checking that the clock is illuminated.

19

Image 19

Contents User Guide for Australia Contents Before you start This appliance is heavy, so take care when moving it CleaningCooker Overview Hotplate Burners Griddle High/medium Wok CradleMedium/low Glide-out Grill Never close the grill door when the grill is onLeft Hand Oven OvensRight Hand Tall Oven To stop the ovens at a specific time of day Setting the time of dayTimer ClockAuto is showing, but you want to revert to manual cooking Multi-Function OvenKey Lock Pre-heat this function before cooking Multi-Function Oven FunctionsHandyrack Main Oven Tips on Cooking with the TimerFish Oven Cooking chart Conventional and Fan OvensOven Shelves General Oven TipsLeft Hand Main Oven Essential Information Cleaning your CookerMain Oven Light Hotplate BurnersWok Cradle GrillControl Panel and Doors Main OvenTall Oven TroubleshootingHotplate burners will not light Hotplate ignition or hotplate burners faultyPlease note Service and SparesIf you have a problem Out of WarrantyInstallation Side clearances Measurements B & C Overhead Measurement aSide clearances Measurement E Unpacking the CookerMoving the Cooker Lowering the Two Rear RollersFitting the Handles and Front Handrail Repositioning the Cooker following ConnectionConversion to LP LevellingFitting the Stability Bracket Fitting the SplashbackFitting the Restraining Chain Gas ConnectionJets Pressure testing for Natural GasTap Adjustment Conversion from Natural Gas to LP GasElectrical Connection Propane Pressure TestingStick on label Thank you Oven CheckFitting the Plinth Customer CareServicing Notes To Replace a Hotpate Burner Jet To Replace a ThermostatTo Replace the Grill Controller To Change a Hotplate TapTo Change the Main Oven Door Catch To Replace an Oven Fan Element To Change Ignition GeneratorTo Remove an Oven Inner Back To Replace an Oven FanTop Element To Adjust the Main Oven Door AngleCircuit Diagram Technical Data Australia Australia Australia