Falcon U109988 - 02 Fitting the Splashback optional, Electrical Connection, Hob Check, Oven Check

Page 23

INSTALLATION

Check the appliance is electrically safe when you have finished.

using the Allen screws. Insert the blanking plugs into the fixing holes.

The fit the front handrail, first remove the 4mm Allen screws from the top corners of the fascia. Locate the handrail to the fascia and secure in place.

Fig.6-9

ArtNo.421-0001 - Fitting a splashback Classic

Fitting the Splashback (optional)

The splashback fits the back of the cooker. It is secured using 4 screws (2 at each end) in the rear edge of the flue grille. Remove the outer 2 screws and then loosen the inner pair. Fit the splashback over the inner screws and then refit the outer screws (Fig.6-9). Tighten all screws to secure.

Electrical Connection

The cooker must be installed by a qualified electrician, in accordance with all relevant British Standards/Codes of Practice (in particular BS 7671), or with the relevant national and local regulations.

WARNING: THE APPLIANCE MUST BE EARTHED.

Note: The cooker must be connected to the correct electrical supply as stated on the voltage label on the cooker, through a suitable cooker control unit incorporating a double pole switch, having a contact separation of at least 3mm in all poles.

The cooker must not be connected to an ordinary domestic power point.

Access to the mains terminal is gained by removing the electrical terminal cover box on the back panel. Connect the mains cable to the correct terminals for your electrical supply type (Fig.6-10and Fig.6-11). Check that the links are correctly fitted and that the terminal screws are tight. Secure the mains cable using the cable clamp.

Hob Check

Check each cooking zone in turn. Be sure to use pans of the correct size and material.

Grill Check

Turn on the grill control and check that the grill heats up.

Oven Check

Set the clock as described earlier, and then turn on the ovens. Check the oven fans start to turn and that the ovens heat up.

Fig.6-10

�

�

�����

���

ArtNo.130-0010 Electrical connections single-phase

������������

Fig.6-11

��

�

��

��

����

 

 

���

�����

���

�����ArtNo.130-0010 Electrical connections 3-phase

�������������

Fig.6-12

Fitting the Plinth

Loosen the three screws along the front bottom edge of the cooker. Hook the central keyhole over the central screw. Twist and fit each end keyhole over their respective screws. Tighten the fixing screws (Fig.6-12).

Please complete your contact details in the front of this section. Please inform the user how to operate the cooker and hand over the instruction pack.

Thank you.

ArtNo.000-0012 - Securing the plinth

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents User Guide Contents Ventilation Installation and MaintenancePersonal Safety Before You Start do not use the hob surface as a cutting board CleaningHob Care Cooker CareHob Cooker OverviewAutomatic Heat-up, a Residual Heat Indicator, HPan Detector 0Fig.2-8 Glide-out GrillChild Lock, L Pan Protection FunctionMulti-function oven functions  Never close the grill door when the grill is onOvens Left-Hand Multi-function OvenConventional oven top and base heat Fan ovenFanned grilling Fan assisted ovenOperating the Ovens Right-hand tall ovenMinute Minder Setting the time of dayTo start and then stop the left-hand oven using the Timer ClockOven Shelves Left-hand Main Oven AccessoriesAuto is showing, but you want to revert to manual cooking Key LockHandyrack Main Oven Main Oven LightOven shelves Right-hand Tall Oven General Oven Tips Tips on Cooking with the TimerCooking Tips Daily Care Cleaning Your CookerCleaning Spills Cleaning Burned-on SpillsControl Panel and Doors ‘Cook & Clean’ PanelsTall Oven Removing the Panels to clean the Enamel InteriorTroubleshooting Food is cooking too slowly, too quickly, or burning Timed oven is not coming on when turned on manuallyTimed oven is not coming on when automatic cooking Oven temperature getting hotter as the cooker gets older Provision of Ventilation Installation Dear Installer Safety RequirementsMoving the Cooker Positioning the CookerUnpacking the Cooker Fitting the Handles Completing the MoveRepositioning the Cooker following Connection LevellingGrill Check Fitting the Splashback optionalElectrical Connection Hob CheckServicing  The door is heavy, so take care To Adjust an Oven Door AngleTo Remove Grill Element To Replace an Oven DoorTo Replace an Oven Door Seal To Adjust the Main Oven Door Catch KeepTo Replace the Tall Oven Door Outer Panel To Change the Main Oven Door LatchTo Change Oven Light Bulb To Replace an Oven FanTo Remove the Left-hand Oven Bottom and Top Elements Code Description Colour Code Circuit Diagram OvenKey Circuit Diagram Hob Connections Technical DataDimensions Français Sécurité personnelle Installation et EntretienAvant de commencer… Odeur de neufNettoyage Français Conseils relatifs à la table de cuissonTable de cuisson Vue d’ensemble de la CuisinièreTableau Détection de récipient de cuissonIndicateur de chaleur résiduelle, H Protection de récipient de cuisson Chauffage automatique, aVerrouillage sécurité enfants, L Fonctions du four multifonctions Gril Coulissant Glide-outFours Four gaucheFour ventilé mixte Four ventiléGril ventilé Fonctionnement des fours Four droitArrêt automatique du four gauche HorlogeRéglage de l’heure MinuterieDésactivation de la fonction de verrouillage Fonction de verrouillageGrilles de four Four gauche four principal Activation de la fonction de verrouillageHandyrack Eclairage du FourGrilles de four Four droit four haut Conseils généraux pour la cuisson au four Conseils pour la CuissonNettoyage des Déversements Accidentels Nettoyage de la CuisinièreInformations importantes Entretien QuotidienNettoyage des Déversements Brûlés Gril CoulissantPanneaux autonettoyants Panneau de Commande et PortesFour Haut Dépannage ’éclairage du four ne fonctionne pas La cuisson au four n’est pas uniformeLe four ne s’allume pas Positionnement de la Cuisinière ’intention de l’installateurEmplacement de la Cuisinière Prescriptions de SécuritéDéballage de la Cuisinière Déplacement de la CuisinièreMise à Niveau Abaissement des Deux Galets ArrièrePositionnement Final Repositionnement de la Cuisinière après RaccordementContrôle du gril Montage des poignéesRaccordement Électrique Contrôle de la Table de CuissonEntretien Remplacement d’un élément de table de cuissonRemplacement d’une porte de four Remplacement de l’interrupteur d’éclairageRemplacement d’un thermostat Remplacement d’un regulateur de gril19. Dépose d’un protecteur thermique d’element de four Remplacement du verrouillage de porte principale de fourRemplacement d’un joint de porte de four 22. Dépose du ventilateur du four Remplacement de l’ampoule d’éclairage du four20. Dépose de la partie arriere interne du four 21. Dépose de l’element du four ventileCode Elément Couleur Schéma de câblage FoursLégende Schéma de câblage Table de cuisson Electricité Fiche techniqueRaccordments PuissancesArtNo.000-0001 Aga address block
Top Page Image Contents