
Control Pad
Functions
Note: | The appearance of your oven control may differ slightly from the one illustrated |
| below. However, all functions are the same. |
READ ALL INSTRUCTIONS CAREFULLYBEFOREUSING THE OVEN. Detailed instructions for each function follow later in this book.
For satisfactory use of your oven, become familiar with the various functions of the oven as described below.
BAKE
Used to enter the normal baking mode
CONV. BAKE/ROAST Used to enter the convection baking or roasting mode
CLEAN
Used to select the
UP and DOWN ARROWS Used to set the clock, the timer and the oven tern
TIMER
AO_OFF
J
TIMER
Used to set or cancel the minute timer. The minute timer does'nt
start or stop cooking.
CLEAR
Used to clear any oven mode previously entered except the time of day and the
VARI BROIL Used to select the variable broil mode
BAKETIME
Used to enter the length of the baking time.
BAKE | STOP\ | \ | CLEAR |
TIME | TIME | OFF |
\_
STOP TiM E _
Usedwith BAKE, OVEN COOK TIME, and CLEAN to program _
delayed baking or delayed self- cleaning cycle stop time.
minute timer. Push
clear to stop cooking.
CLOCK
Used to set the time of the day.
Note: | Push buttons or pads may be shaped differently. |
Note: | After the appliance is first plugged in, or after a power interruption, the clock must be set |
| to the correct time of day before the rest of the electronic control functions will operate. |
The oven can be programmed for:
•Conventional baking and roasting
•Convection baking and roasting
•Timed baking and roasting (conventional and convection) with automatic on and off times.
•Vari broiling
•
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent operation. Push and hold STOPTIME After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pushed. To return the sound, push and hold STOPTIME again for 7 seconds until a beep is heard.
10