Makita RBC2500 instruction manual Mounting of Protector

Page 11

MOUNTING OF PROTECTOR

To meet the applicable safety provisions, only the tool/ protector combinations as indicated in the table must be used.

Be sure to use genuine MAKITA cutter blades or nylon cutting head.

–The cutter blade must be well polished, free of cracks or breakage. If the cutter blade hits against a stone during operation, stop the engine and check the blade immediately.

–Polish or replace the cutter blade every three hours of operation.

–If the nylon cutting head hits against a stone during operation, stop the engine and check the nylon cutting head immediately.

Star Blade

Eddy Blade

 

Protector for metal blades

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PART NO. 6258507600 PART NO. 6258507700

PART NO. 6258061001

CAUTION : The appropriate protector must always be installed, for your own safety and in order to comply with accident-prevention regulations. Operation of the equipment without the guard being in place is not permitted.

Nylon cutting head

Protector for cord cutter

 

 

 

 

 

 

 

 

 

 

 

 

PART NO. 6218016000 PART NO. 6258060001

–Fix the protector (1) to the clamp (3) with two bolts M6 x 30 (2).

–When using the string head, fit the protector (6) into the protector (1), and tighten them with two nuts (5) and two screws (4).

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents RBC2500RBC2510 English SymbolsPersonal protective equipment Safety InstructionsGeneral Instructions Intended use of the machineRefuelling Kickback prevention Maintenance instructionsMethod of operation KickbackPackaging When asking for help, please give the following informationNever straighten or weld damaged cutting tools First AidRBC2500 RBC2510 Model Technical Data RBC2500, RBC2510RBC2500 Handle Type RBC2510 Loop Handle Type Designation of PartsConnection of the switch cord Assembly of Engine and ShaftHow to mount the control cable For machines with Loop Handle Mounting of HandleFor machines with U Handle models Mounting of Protector With the hex wrench still in place Mounting of Cutter Blade or Nylon Cutter HeadFuel and oil mixture FUELS/REFUELLINGHandling fuel Detachment Points in Operation and HOW to StopCorrect Handling of Machine Attachment of shoulder strapStopping Adjustment of LOW-SPEED Rotation IdlingResharpening the Cutting Tool Replacing the nylon cord OperationServicing Instructions Daily checkup and maintenanceCleaning of air cleaner Servicing InstructionsSuction head in the fuel tank Cleaning of muffler exhaust portChecking the spark plug Supply of grease to gear caseStorage Maintenance scheduleFault location Parts Covered Emission Component Defect Warranty PeriodOWNER’S Warranty Responsibilities Obtaining Warranty ServiceWhat is not Covered HOW to Make a Claim Français Équipement personnel de protection Consignes DE SécuritéInstructions générales Utilisation spéciale de la machineRavitaillement Prévention contre le rejet Instructions de maintenanceMéthode dutilisation RejetEmballage Premier secoursRBC2500 RBC2510 Modèle Caracteristiques Techniques RBC2500, RBC2510RBC2500 Poignée en U RBC2510 Poignée Simple Nomenclature DES PiècesRaccordement de la corde d’interrupteur Montage du câble de commandeAssemblage DU Moteur ET DE L’ARBRE Au moteur Montage DE LA PoignéePour les modèles à polgnée en U Pour les modèles à poignée simpleMontage DU Dispositif DE Protection La clé hexgonale étant toujours en place Montage DE LA Lame DE Coupe OU DE LA Tête DE Coupe À FILMélange dhuile et de carburant CARBURANTS/RAVITAILLEMENTManipulation du carburant Retrait Manipulation Correcte DE LA MachineConsignes DE Mise EN Marche ET Arrêt DE LA Machine Fixation du harnaisReglage DE LA Marche a Petite Vitesse AU Ralenti Réaffûtage DE Loutil DE CoupeFonctionnement Remplacement du fil en nylonTête de coupe à fil en nylon Nettoyage du filtre à air Contrôle et opérations de maintenance réguliersInstructions Relatives AUX Réparations Instructions Relatives AUX RéparationsNettoyage de lorifice du pot déchappement Contôle de la bougie dallumageGraissage du carter de la boîte de vitesse Tête daspiration dans le réservoir de carburantLocalisation des défauts RemisagePlan de malntenance Lista de contenidos Página SimbolosEquipo Personal de Protección Instrucciones DE SeguridadInstrucciones generales Uso intentado de la máquinaReabastecimiento Instrucciones de mantenimiento Método de trabajoContragolpe Herramientas de CorteEmbalaje Nunca rectificar o soldar las herramientas de corte dañadasPrimeros Auxilios RBC2500 RBC2510 Modelo Datos Técnicos RBC2500, RBC2510RBC2500 Manillar en U RBC2510 Manillar en bucle Denominación DE PartesEmpalme del cordón del interruptor Montaje DE Motor Y EJEMontaje del cable de control Al motor Montaje DEL ManillarPara máquinas con manillar en U Para máquinas con manillar cerradoMontaje DEL Protector Con la llave hexagonal todavía puesta Montaje DE LA Hoja DE Corte O Cabezal DE Corte DE NylonMezcla de combustible y aceite COMBUSTIBLES/REABASTECIMIENTOManipulación del combustible Separación USO Correcto DE LA MáquinaPuntos Relacionados CON EL Manejo Y LA Parada Colocación de la correa para el hombroAjuste DEL Giro a Baja Velocidad Ralentí Afilar LA Herramienta DE CorteSustitución del cabezal de Nylon OperaciónLimpieza del filtro de aire Instrucciones DE ServicioInstrucciones DE Servicio Limpieza del orificio de salida del silenciador Comprobación de la BujíaSuministro de grasa a la caja de engranajes Cabezal de succión en el tanque de combustibleLocalizacion de averias AlmacenamientoEsquema de mantenimiento Page 11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502, Japan
Related manuals
Manual 19 pages 44.83 Kb

RBC2500 specifications

The Makita RBC2510 and RBC2500 are robust string trimmers designed for landscapers and homeowners seeking reliable and efficient tools for garden maintenance. Both models embody Makita's commitment to quality, performance, and user-friendly features, making them popular choices in the outdoor power equipment market.

The RBC2510 features a powerful 25cc 2-stroke engine, delivering optimal cutting performance while maintaining a low weight for better maneuverability. Its lightweight design, weighing approximately 6.4 kg (14.1 lbs) without the cutting equipment, enhances user comfort during prolonged use. The RBC2500, with a similar engine configuration, boasts a 25.4cc power plant that provides ample torque, allowing it to tackle tougher grass and weeds with ease.

These trimmers come equipped with a semi-automatic dual-line cutting head. The tap-and-go system ensures that users can quickly advance the cutting line with a simple tap on the ground, minimizing downtime. The cutting width of both models is around 400mm (15.75 inches), allowing for efficient trimming of larger areas.

One of the standout features of the RBC2510 and RBC2500 is their Easy Start technology. This system reduces the effort required to start the engine, making it particularly attractive for users who may struggle with traditional pull starts. While the RBC2510 employs a spring-assisted starter, the RBC2500 is known for its easy-start mechanism that minimizes tedious starting procedures.

Both models feature an ergonomically designed handle that provides excellent control and comfort, reducing vibrations and allowing for extended use without causing excessive fatigue. Additionally, the adjustable harness available with these trimmers aids in weight distribution, making it easier to handle the equipment for extended periods.

Durability is another key characteristic of the Makita RBC2510 and RBC2500. Built from high-quality materials, these trimmers are designed to withstand harsh outdoor conditions, ensuring longevity and reliability for users. The gear case is constructed to be robust, and the overall design aims to protect the engine and components from damage during operation.

In conclusion, the Makita RBC2510 and RBC2500 string trimmers offer powerful performance, user-friendly features, and robust construction, appealing to both professional landscapers and homeowners. With their advanced technologies and ergonomic designs, these trimmers ensure efficient and comfortable operation, making them invaluable tools for maintaining outdoor spaces.
Top Page Image Contents