Craftsman 316.29271 manual Cleaning the Unit, Long Term Storage, Transporting

Page 16

MAINTENANCE AND REPAIR INSTRUCTIONS

Cleaning the Unit

WARNING: To avoid serious personal injury,

always turn the unit off and allow it to cool before you clean or perform any maintenance on it.

•Use a small brush to clean off the outside of the unit and to keep the air vents free of obstructions.

•Do not use strong detergents or petroleum based cleaners, such as kerosene. Some household cleaners contain aromatic oils such as pine and lemon that can damage the plastic housings or handles. Wipe off any moisture with a soft cloth.

Storage

•Never store the unit with fuel in the tank where fumes may reach an open flame or spark.

•Allow the engine to cool before storing.

•Store the unit in a locked up area to prevent unauthorized use or damage.

•Store the unit in a dry, well-ventilated area. Do not store next to corrosive material like fertilizer.

•Store the unit out of the reach of children.

Long Term Storage

If the unit will be stored for an extended time:

1.Carefully drain all gasoline from the fuel tank by removing the fuel cap and tipping the motor housing over to allow the fuel to drain into an approved gas container. Do not use gas that has been stored for more than 60 days. Dispose of the old gasoline in accordance with Federal, State and Local regulations.

2.Start the engine and allow it to run until it stalls. This ensures that all gasoline has been drained from the carburetor.

3.Allow the engine to cool. Remove the spark plug and put 1 oz. (30 ml) of high quality motor oil into the cylinder. Pull the starter rope slowly to distribute the oil. Reinstall the spark plug.

NOTE: Remove the spark plug and drain all of the oil from the cylinder before attempting to start the unit after storage.

4.Change the oil, referring to the Changing the Oil section. Dispose of the old oil in accordance with Federal, State and Local regulations.

5.Thoroughly clean the unit and inspect for any loose or damaged parts. Repair or replace damaged parts and tighten loose screws, nuts or bolts.

6.To take up less storage area, loosen the handlebar knobs and fold the handlebar down. The unit is ready for storage.

Transporting

•Allow the engine to cool before transporting.

•Secure the unit while transporting.

•Drain the fuel tank before transporting.

•Tighten fuel cap before transporting.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Cultivator / Edger Warranty Table of ContentsIntroduction California Proposition 65 WarningImportant Safety Instructions Safety Warnings for GAS UnitsRules for Safe Operation Before OperatingSave These Instructions Other Safety WarningsWhile Operating Symbol Meaning Safety and International SymbolsChoke Control Know Your Unit Know Your CultivatorAssembly Instructions Adjusting Tine DepthPositioning the Handlebars Attaching the Edger Wheel and BladeRecommended OIL Type OIL and Fuel InformationAdding OIL to Crankcase Initial USE Recommended Fuel Type Fueling the UnitStarting Instructions STARTING/STOPPING InstructionsStopping Instructions Operating Instructions Operating TipsTransporting the Unit Never pick-up or carry the unit while the engine is runningMaintenance and Repair Instructions Frequency Maintenance Required Refer toTine Removal and Replacement Maintenance ScheduleChanging the OIL Checking the OIL LevelHandling the unit AIR Filter Maintenance Carburetor AdjustmentReplacing the Spark Plug Spark Arrestor MaintenanceElectrodes. Grit in the engine could damage the cylinder Cleaning the Unit StorageLong Term Storage TransportingTroubleshooting Rocker ARM Clearance Remove the rocker arm cover and gasketIntake Exhaust Engine SpecificationsCultivator Page Owner’s Warranty Responsibilities Your Warranty Rights and ObligationsManufacturer’s Warranty Coverage Cultivadora / Bordeadora Introduccion GarantiaIndice DE Contenidos Proposición 65 DE CaliforniaImportante Informacion DE Seguridad Advertencia Laes muygasolinaNormas Para UNA Operacion Segura Lea Todas las Instrucciones Antest DE LA OperaciónDurante la Operación Conserve Estas InstruccionesOtras Advertencias de Seguridad Advertencia No Advertencia LosAdvertencia Simbolos DE Seguridad DE IntercacionalesConozca SU Unidad Conozca SU UnidadAplicacion Instrucciones DE Ensamble Colocación DEL ManubrioAjuste DE LA Profundidad Conexión DE LA Rueda Y DE LA Cuchilla DE LA BordeadoraAdvertencia EL Llenar Informacion DEL Aceite Y DEL CombustibleTipo DE Aceite Recomendado Carga E Aceite EN EL Carter DEL Cigüeñal USO InicialAdvertencia Lagasolina es Advertencia Saque laAdvertencia Cargue el Tipo DE Combustible RecomendadoAdvertencia Evite los Instrucciones DE Arranque Y ApagadoInstrucciones DE Arranque Instrucciones DE ApagadoAdvertencia forma Advertencia gravesAdvertencia evitarPara Advertencia Para evitarInstrucciones DE Mantenimiento Y Reparacion Programa DE MantenimientoFrecuencia Mantenimiento Requerido Consulte Remoción Y Reposición DE LAS PuasPrecaucion Para evitar Precaucion Use guantesInspección DEL Nivel DE Aceite Cambio DEL AceiteMantenimiento DEL Filtro DE Aire Ajuste DEL CarburadorLimpieza del filtro de aire Inspección del CombustibleMantenimiento DEL Amortiguador DE Chispas Precaucion No limpieCambio de la Bujía de Encendido Transporte AlmacenamientoLimpieza de la Unidad Resolucion DE Problemas EL Motor no ArrancaEL Motor no Funciona EN Minima EL Motor no AceleraHuelgo DEL Brazo Oscilante Entrada Motor EspecificacionesEJE Impulsor Y Cultivador Parts List Engine Parts Model Sears Cultivator 4-CYCLE GAS Cultivator 753-04059 Clevis Pin Responsabilidades del Propietario para la Garantiá Cobertura de la Garantía del FabricanteRepair Protection Agreements Get it fixed, at your home or ours

316.29271 specifications

The Craftsman 316.29271 is a versatile and robust power tool ideal for both professional tradespeople and DIY enthusiasts. This model represents the pinnacle of functionality and convenience in the world of electric tools, making it a must-have in any workshop.

One of the standout features of the Craftsman 316.29271 is its powerful motor. Equipped with a high-performance engine, it delivers exceptional torque and speed, allowing users to tackle a wide variety of tasks with ease. Whether you are drilling, driving screws, or working on intricate projects, this tool ensures optimal performance every time.

Another key feature of the Craftsman 316.29271 is its ergonomic design. The tool is built with user comfort in mind, featuring a soft-grip handle that minimizes vibration and reduces hand fatigue during extended use. This thoughtful design enhances overall control and precision, making it easier to navigate tight spaces and intricate tasks.

The Craftsman 316.29271 also incorporates advanced technologies that set it apart from other tools in its category. Its variable speed settings allow users to adjust the speed according to the specific task at hand, providing maximum versatility. Additionally, the tool's built-in LED work light illuminates dark work areas, ensuring visibility and accuracy even in low-light conditions.

Durability is another hallmark of the Craftsman 316.29271. Constructed with high-quality materials, this tool is designed to withstand the rigors of frequent use. Its rugged exterior not only protects the internal components but also contributes to a long lifespan, making it a wise investment for both casual and serious users.

The Craftsman 316.29271 is compatible with a wide range of accessories, which enhances its versatility even further. From drilling bits to screwdriver attachments, users can easily switch out components to suit their specific project needs. This adaptability makes it an excellent choice for tackling various applications, from minor repairs to major renovations.

In summary, the Craftsman 316.29271 combines power, comfort, and durability in a sleek, innovative design. With its impressive motor, ergonomic features, and advanced technologies, this tool is well-equipped to handle a multitude of tasks with ease and efficiency. Whether you're a seasoned professional or a home improvement novice, the Craftsman 316.29271 is a reliable companion for all your crafting and construction needs.
Top Page Image Contents