Craftsman 316.29271 manual OIL and Fuel Information, Recommended OIL Type

Page 8

OIL AND FUEL INFORMATION

CAUTION: OVERFILLING OIL CRANKCASE MAY

CAUSE PRODUCT DAMAGE. Check and maintain the proper oil level in the crank case; it is important and cannot be overemphasized. Check the oil before each use and change it as needed. See Changing the Oil.

RECOMMENDED OIL TYPE

Using the proper type and weight of oil in

the crankcase is extremely important. Check the oil before each use and change

the oil regularly. Using incorrect or dirty oil can cause premature engine wear and failure.

Use a high-quality SAE 30 weight oil of API (American Petroleum Institute) service class SF, SG, SH.

ADDING OIL TO CRANKCASE: INITIAL USE

NOTE: This unit is shipped without oil in the crankcase. In order to avoid damage to the unit, put oil in the crankcase before attempting to start unit.

Your unit is supplied with one 3.4 fluid oz. (100 ml.) bottle of SAE 30 SF, SG, SH oil (Fig. 5).

NOTE: Save the bottle to measure the correct amount for future oil changes. See Changing the Oil.

NOTE: Your new 4-Cycle cultivator is shipped for operation in conditions above 40°F (4°C). For cold weather operation, where temperatures fall below 40°F (4°C), use a high-quality SAE 10W30 weight oil of API (American Petroleum Institute) service class SF, SG, SH.

1.Unscrew the oil bottle top and remove the paper seal covering the opening. Replace the top and cut the tip off the funnel spout (Fig. 5).

2.Place the unit on a flat level surface with the cultivator in a horizontal position (Fig. 6).

3.Remove the oil plug / dipstick from the crankcase (Fig. 7).

4.Pour the entire bottle of oil into the oil fill hole (Fig. 8).

NOTE: Never add oil to the fuel or fuel tank.

5.Wipe up any oil that may have spilled and reinstall the oil fill plug / dipstick.

The importance of checking and maintaining the proper oil level in the crankcase cannot be overemphasized. Check oil before each use and change as specified in the Maintenance Schedule.

Funnel Spout

Fig. 5

Oil Fill

Plug/Dipstick

Fig. 6

O-Ring

Oil Fill Plug/Dipstick

Oil Fill Hole

Fig. 7

Oil Fill

Fig. 8

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Cultivator / Edger Warranty Table of ContentsIntroduction California Proposition 65 WarningImportant Safety Instructions Safety Warnings for GAS UnitsRules for Safe Operation Before OperatingWhile Operating Other Safety WarningsSave These Instructions Choke Control Safety and International SymbolsSymbol Meaning Know Your Unit Know Your CultivatorAssembly Instructions Adjusting Tine DepthPositioning the Handlebars Attaching the Edger Wheel and BladeAdding OIL to Crankcase Initial USE OIL and Fuel InformationRecommended OIL Type Recommended Fuel Type Fueling the UnitStopping Instructions STARTING/STOPPING InstructionsStarting Instructions Operating Instructions Operating TipsTransporting the Unit Never pick-up or carry the unit while the engine is runningMaintenance and Repair Instructions Frequency Maintenance Required Refer toTine Removal and Replacement Maintenance ScheduleHandling the unit Checking the OIL LevelChanging the OIL AIR Filter Maintenance Carburetor AdjustmentElectrodes. Grit in the engine could damage the cylinder Spark Arrestor MaintenanceReplacing the Spark Plug Cleaning the Unit StorageLong Term Storage TransportingTroubleshooting Rocker ARM Clearance Remove the rocker arm cover and gasketIntake Exhaust Cultivator SpecificationsEngine Page Manufacturer’s Warranty Coverage Your Warranty Rights and ObligationsOwner’s Warranty Responsibilities Cultivadora / Bordeadora Introduccion GarantiaIndice DE Contenidos Proposición 65 DE CaliforniaImportante Informacion DE Seguridad Advertencia Laes muygasolinaNormas Para UNA Operacion Segura Lea Todas las Instrucciones Antest DE LA OperaciónOtras Advertencias de Seguridad Conserve Estas InstruccionesDurante la Operación Advertencia No Advertencia LosAdvertencia Simbolos DE Seguridad DE IntercacionalesAplicacion Conozca SU UnidadConozca SU Unidad Instrucciones DE Ensamble Colocación DEL ManubrioAjuste DE LA Profundidad Conexión DE LA Rueda Y DE LA Cuchilla DE LA BordeadoraAdvertencia EL Llenar Informacion DEL Aceite Y DEL CombustibleTipo DE Aceite Recomendado Carga E Aceite EN EL Carter DEL Cigüeñal USO InicialAdvertencia Lagasolina es Advertencia Saque laAdvertencia Cargue el Tipo DE Combustible RecomendadoAdvertencia Evite los Instrucciones DE Arranque Y ApagadoInstrucciones DE Arranque Instrucciones DE ApagadoAdvertencia forma Advertencia gravesAdvertencia evitarPara Advertencia Para evitarInstrucciones DE Mantenimiento Y Reparacion Programa DE MantenimientoFrecuencia Mantenimiento Requerido Consulte Remoción Y Reposición DE LAS PuasPrecaucion Para evitar Precaucion Use guantesInspección DEL Nivel DE Aceite Cambio DEL AceiteMantenimiento DEL Filtro DE Aire Ajuste DEL CarburadorLimpieza del filtro de aire Inspección del CombustibleCambio de la Bujía de Encendido Precaucion No limpieMantenimiento DEL Amortiguador DE Chispas Limpieza de la Unidad AlmacenamientoTransporte Resolucion DE Problemas EL Motor no ArrancaEL Motor no Funciona EN Minima EL Motor no AceleraHuelgo DEL Brazo Oscilante Entrada EJE Impulsor Y Cultivador EspecificacionesMotor Parts List Engine Parts Model Sears Cultivator 4-CYCLE GAS Cultivator 753-04059 Clevis Pin Responsabilidades del Propietario para la Garantiá Cobertura de la Garantía del FabricanteRepair Protection Agreements Get it fixed, at your home or ours

316.29271 specifications

The Craftsman 316.29271 is a versatile and robust power tool ideal for both professional tradespeople and DIY enthusiasts. This model represents the pinnacle of functionality and convenience in the world of electric tools, making it a must-have in any workshop.

One of the standout features of the Craftsman 316.29271 is its powerful motor. Equipped with a high-performance engine, it delivers exceptional torque and speed, allowing users to tackle a wide variety of tasks with ease. Whether you are drilling, driving screws, or working on intricate projects, this tool ensures optimal performance every time.

Another key feature of the Craftsman 316.29271 is its ergonomic design. The tool is built with user comfort in mind, featuring a soft-grip handle that minimizes vibration and reduces hand fatigue during extended use. This thoughtful design enhances overall control and precision, making it easier to navigate tight spaces and intricate tasks.

The Craftsman 316.29271 also incorporates advanced technologies that set it apart from other tools in its category. Its variable speed settings allow users to adjust the speed according to the specific task at hand, providing maximum versatility. Additionally, the tool's built-in LED work light illuminates dark work areas, ensuring visibility and accuracy even in low-light conditions.

Durability is another hallmark of the Craftsman 316.29271. Constructed with high-quality materials, this tool is designed to withstand the rigors of frequent use. Its rugged exterior not only protects the internal components but also contributes to a long lifespan, making it a wise investment for both casual and serious users.

The Craftsman 316.29271 is compatible with a wide range of accessories, which enhances its versatility even further. From drilling bits to screwdriver attachments, users can easily switch out components to suit their specific project needs. This adaptability makes it an excellent choice for tackling various applications, from minor repairs to major renovations.

In summary, the Craftsman 316.29271 combines power, comfort, and durability in a sleek, innovative design. With its impressive motor, ergonomic features, and advanced technologies, this tool is well-equipped to handle a multitude of tasks with ease and efficiency. Whether you're a seasoned professional or a home improvement novice, the Craftsman 316.29271 is a reliable companion for all your crafting and construction needs.
Top Page Image Contents