Craftsman 316.29271 Introduction, Warranty, Table of Contents, California Proposition 65 Warning

Page 2

INTRODUCTION

TABLE OF CONTENTS

 

Maintenance and Repair Instructions . . .

. . . . . . . .12

Warranty

.2

Cleaning and Storage

. . . . .

. . . . . . . .16

Troubleshooting Chart

 

. . . . . . . .17

Service Information

.2

. . . . .

Specifications

 

. . . . . . . .20

Rules for Safe Operation

.3

. . . . .

Notes (Intentionally Blank)

 

. . . . . . . .21

Know Your Unit

.6

. . . . .

CARB / EPA Warranty Information

 

. . . . . . . .22

Assembly Instructions

.7

. . . . .

Parts List

 

. . E21-E23

Oil and Fuel Information

.8

. . . . .

Repair Protection Agreement . . . .

Inside Back Cover

Starting/Stopping Instructions.

10

Service Numbers

 

Back Cover

Operating Instructions

11

. . . . .

 

 

 

WARRANTY

Full Two-Year Warranty on Craftsman Cultivator / Edger

For two (2) years from the date of purchase, if this Craftsman Equipment is maintained, lubricated, and tuned up according to the instructions in the operator’s manual, Sears will repair or replace free of charge any parts found to be defective in material or workmanship. Warranty service is available free of charge by returning Craftsman equipment to your nearest Sears Service Center. In-home warranty service is available but a trip charge will apply. This Warranty applies only while this product is in the United States.

This Warranty does not cover:

•Expendable items which become worn during normal use, such as spark plugs, air cleaners, belts, and oil filters.

•Tire replacement or repair caused by punctures from outside objects, such as nails, thorns, stumps, or glass.

•Repairs necessary because of operator abuse, including but not limited to, damage caused by objects, such as stones or metal debris, oversized stock, impacting objects that bend the frame or crankshaft, or over-speeding the engine.

•Repairs necessary because of operator negligence, including but not limited to, electrical and mechanical damage caused by improper storage, failure to use the proper grade and amount of engine oil, or failure to maintain the equipment according to the instructions contained in the operator’s manual.

•Engine (fuel system) cleaning or repairs caused by fuel determined to be contaminated or oxidized (stale). In general, fuel should be used within 30 days of its purchase date.

•Equipment used for commercial or rental purposes.

TO LOCATE THE NEAREST SEARS SERVICE CENTER OR TO SCHEDULE SERVICE, SIMPLY CONTACT SEARS AT 1–800-4-MY-HOME®.

This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

Sears, Roebuck and Co., Dept 817WA, Hoffman Estates, IL 60179

CALIFORNIA PROPOSITION 65 WARNING

WARNING

THE ENGINE EXHAUST FROM THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.

SPARK ARRESTOR NOTE

NOTE: For users on U.S. Forest Land and in the states of California, Maine, Oregon and Washington. All U.S. Forest Land and the state of California (Public Resources Codes 4442 and 4443), Oregon and Washington require, by law that certain internal combustion engines operated on forest brush and/or grass-covered areas be equipped with a spark arrestor, maintained in effective working order, or the engine be constructed, equipped and maintained for the prevention of fire. Check with your state or local authorities for regulations pertaining to these requirements. Failure to follow these requirements could subject you to liability or a fine. This unit is factory equipped with a spark arrestor. If it requires replacement, ask your LOCAL SERVICE DEALER to install the Accessory Part #180890 Spark Arrestor Kit.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Cultivator / Edger Introduction WarrantyTable of Contents California Proposition 65 WarningRules for Safe Operation Important Safety InstructionsSafety Warnings for GAS Units Before OperatingWhile Operating Other Safety WarningsSave These Instructions Choke Control Safety and International SymbolsSymbol Meaning Know Your Unit Know Your CultivatorPositioning the Handlebars Assembly InstructionsAdjusting Tine Depth Attaching the Edger Wheel and BladeAdding OIL to Crankcase Initial USE OIL and Fuel InformationRecommended OIL Type Recommended Fuel Type Fueling the UnitStopping Instructions STARTING/STOPPING InstructionsStarting Instructions Transporting the Unit Operating InstructionsOperating Tips Never pick-up or carry the unit while the engine is runningTine Removal and Replacement Maintenance and Repair InstructionsFrequency Maintenance Required Refer to Maintenance ScheduleHandling the unit Checking the OIL LevelChanging the OIL AIR Filter Maintenance Carburetor AdjustmentElectrodes. Grit in the engine could damage the cylinder Spark Arrestor MaintenanceReplacing the Spark Plug Long Term Storage Cleaning the UnitStorage TransportingTroubleshooting Rocker ARM Clearance Remove the rocker arm cover and gasketIntake Exhaust Cultivator SpecificationsEngine Page Manufacturer’s Warranty Coverage Your Warranty Rights and ObligationsOwner’s Warranty Responsibilities Cultivadora / Bordeadora Indice DE Contenidos IntroduccionGarantia Proposición 65 DE CaliforniaNormas Para UNA Operacion Segura Importante Informacion DE SeguridadAdvertencia Laes muygasolina Lea Todas las Instrucciones Antest DE LA OperaciónOtras Advertencias de Seguridad Conserve Estas InstruccionesDurante la Operación Advertencia Advertencia NoAdvertencia Los Simbolos DE Seguridad DE IntercacionalesAplicacion Conozca SU UnidadConozca SU Unidad Ajuste DE LA Profundidad Instrucciones DE EnsambleColocación DEL Manubrio Conexión DE LA Rueda Y DE LA Cuchilla DE LA BordeadoraTipo DE Aceite Recomendado Advertencia EL LlenarInformacion DEL Aceite Y DEL Combustible Carga E Aceite EN EL Carter DEL Cigüeñal USO InicialAdvertencia Cargue el Advertencia Lagasolina esAdvertencia Saque la Tipo DE Combustible RecomendadoInstrucciones DE Arranque Advertencia Evite losInstrucciones DE Arranque Y Apagado Instrucciones DE ApagadoAdvertencia evitarPara Advertencia formaAdvertencia graves Advertencia Para evitarFrecuencia Mantenimiento Requerido Consulte Instrucciones DE Mantenimiento Y ReparacionPrograma DE Mantenimiento Remoción Y Reposición DE LAS PuasInspección DEL Nivel DE Aceite Precaucion Para evitarPrecaucion Use guantes Cambio DEL AceiteLimpieza del filtro de aire Mantenimiento DEL Filtro DE AireAjuste DEL Carburador Inspección del CombustibleCambio de la Bujía de Encendido Precaucion No limpieMantenimiento DEL Amortiguador DE Chispas Limpieza de la Unidad AlmacenamientoTransporte EL Motor no Funciona EN Minima Resolucion DE ProblemasEL Motor no Arranca EL Motor no AceleraHuelgo DEL Brazo Oscilante Entrada EJE Impulsor Y Cultivador EspecificacionesMotor Parts List Engine Parts Model Sears Cultivator 4-CYCLE GAS Cultivator 753-04059 Clevis Pin Responsabilidades del Propietario para la Garantiá Cobertura de la Garantía del FabricanteRepair Protection Agreements Get it fixed, at your home or ours

316.29271 specifications

The Craftsman 316.29271 is a versatile and robust power tool ideal for both professional tradespeople and DIY enthusiasts. This model represents the pinnacle of functionality and convenience in the world of electric tools, making it a must-have in any workshop.

One of the standout features of the Craftsman 316.29271 is its powerful motor. Equipped with a high-performance engine, it delivers exceptional torque and speed, allowing users to tackle a wide variety of tasks with ease. Whether you are drilling, driving screws, or working on intricate projects, this tool ensures optimal performance every time.

Another key feature of the Craftsman 316.29271 is its ergonomic design. The tool is built with user comfort in mind, featuring a soft-grip handle that minimizes vibration and reduces hand fatigue during extended use. This thoughtful design enhances overall control and precision, making it easier to navigate tight spaces and intricate tasks.

The Craftsman 316.29271 also incorporates advanced technologies that set it apart from other tools in its category. Its variable speed settings allow users to adjust the speed according to the specific task at hand, providing maximum versatility. Additionally, the tool's built-in LED work light illuminates dark work areas, ensuring visibility and accuracy even in low-light conditions.

Durability is another hallmark of the Craftsman 316.29271. Constructed with high-quality materials, this tool is designed to withstand the rigors of frequent use. Its rugged exterior not only protects the internal components but also contributes to a long lifespan, making it a wise investment for both casual and serious users.

The Craftsman 316.29271 is compatible with a wide range of accessories, which enhances its versatility even further. From drilling bits to screwdriver attachments, users can easily switch out components to suit their specific project needs. This adaptability makes it an excellent choice for tackling various applications, from minor repairs to major renovations.

In summary, the Craftsman 316.29271 combines power, comfort, and durability in a sleek, innovative design. With its impressive motor, ergonomic features, and advanced technologies, this tool is well-equipped to handle a multitude of tasks with ease and efficiency. Whether you're a seasoned professional or a home improvement novice, the Craftsman 316.29271 is a reliable companion for all your crafting and construction needs.
Top Page Image Contents