Connecting the System
When connecting a Rear view camera
When using this product with a rear view camera, automatic switching to video from a rear view camera is possible when the gear shift is moved to REVERSE (R) position.
Rear view mode also allows you to check what is behind you while driving.
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.
•The screen image may appear reversed.
•The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. Do not use this function for entertainment purposes.
•The object in rear view may appear closer or more distant than in reality.
•Please note that the edges of the rear view camera images may differ slightly according to whether full screen images are displayed when backing, and whether the images are used for checking the rear when the vehicle is moving forward.
5 m (16 ft. 5 in.)
Violet/white
Brown
15 cm (5 - 7/8 in.)
Brawn
(REAR VIEW CAMERA IN)
Note:
It is necessary to set to “CAMERA” in “SETUP” when connecting the rear view camera. (For details, see the “Operation Manual”)
This product
Extension lead (for reverse signal)
Fuse resistor
About connection method 
☞See Page 11.
RCA cable
(sold separately)
Rear view
camera
To video output
Note:
Connect to the rear view camera. Do not connect to any other equipment.
Be sure to use only the supplied extension lead. Use of another lead could cause fire, smoke and/or damage this product.
15