Digital Media AVIC-D1 installation manual After Installing this product, Reconnecting the battery

Page 27

After Installing this product

1.Reconnecting the battery.

First, double-check that all connections are correct and that this product is installed cor- rectly. Reassemble all vehicle components that you previously removed. Then reconnect the negative (–) cable to the negative (–) terminal of the battery.

2.Start the engine.

3.Press the RESET button on this product.

Press the RESET button on this product using a pointed object such as the tip of a pen.

4.Enter the following settings:

1 Install the program in the navigation system.

2 Make any necessary installation angle adjustments. (Refer to “Correcting the installation angle” in the “Operation Manual”.)

3 Drive until the initialized sensors start operating normally.

4 Set the time and language.

Set the navigation system as explained in the “Operation Manual” or “Hardware Manual”.

After installing this product, be sure to check in a safe place, that the vehicle is per- forming normally.

English

Español

Deutsch Français Italiano

Nederlands

26

Image 27

Contents Installation Manual Important Information Contents Important Safeguards Connecting the System To prevent damage Before installing this productParts supplied See Page 9 to Connecting the systemFrançais Italiano ON/OFF Connecting the power cordFor information on other leads See Pink CAR Speed Signal Input Español Front Output When connecting to separately sold power ampDeutsch Français Rear View Camera When connecting a Rear view cameraWhen using a display connected to rear video output When connecting the external video component and the displayInstallation To guard against electromagnetic interference Before installingInstallation notes Installing this productParts marked * are pre-installed DIN Front-mount DIN Front/Rear-mountDIN Rear-mount Installing the GPS antenna GPS antenna Metal sheet Clamp 5 pcs When routing the lead in from the top of the door When installing the antenna outside the vehicle on the bodyReconnecting the battery After Installing this productInformation Importante Importantes Mesures DE SommaireImportantes Mesures DE Securite Branchement du système Pour éviter des dégâts Avant de raccorder ce produitPièces fournies Cf. Pages 9 à Branchement du systèmeEnglish Noir masse Branchement du cordon d’alimentationEnglish Français Deutsch Français Rose CAR Speed Signal Input Violet/blanc Reversegear Signal Input NON-FADING Output Français Veillez à utiliser le cordon-rallonge fourni. L’utilisation Pour relier ce produit avec une caméra de rétroviséePour utiliser un écran branché à la sortie vidéo arrière Pour relier l’appareil vidéo externe et l’affichageInstallation Avant de procéder à l’installation Remarques sur l’installation Installation de ce produitLes pièces repérées * sont déjà montées sur ce produit Montage DIN avant Montage DIN avant/arrièreMontage DIN arrière Installation de l’antenne GPS Français Deutsch Français Italiano Nederlands Cheminement du câble sur le haut de la portière Branchement de la batterie Après installation de ce produitPioneer Corporation