Digital Media AVIC-D1 When installing the antenna outside the vehicle on the body

Page 26

Installation

When installing the antenna outside the vehicle (on the body)

Put the GPS antenna in a position as level as possible, such as on the roof or trunk lid. (The GPS antenna is fastened with a magnet.)

GPS antenna

When routing the lead in from the top of the door

Make a U-shaped loop in the lead on the outside to prevent rainwater from flowing along the lead into the interior of the vehicle.

Clamps

Use clamps to secure the lead where necessary inside the vehicle.

When routing the lead in from inside the trunk

Clamps

Use clamps to secure the lead where necessary inside the vehicle.

Rubber packing

Waterproof pad

Make sure the waterproof pad contacts the top of the rubber packing.

Make a U-shaped loop in the lead outside the rubber packing to prevent rainwater from flowing along the lead into the interior of the vehicle.

25

Image 26
Contents Installation Manual Important Information Contents Important Safeguards Connecting the System Before installing this product To prevent damageParts supplied Connecting the system See Page 9 toFrançais Italiano Connecting the power cord ON/OFFFor information on other leads See Pink CAR Speed Signal Input Español When connecting to separately sold power amp Front OutputDeutsch Français When connecting a Rear view camera Rear View CameraWhen connecting the external video component and the display When using a display connected to rear video outputInstallation Before installing To guard against electromagnetic interferenceInstalling this product Installation notesParts marked * are pre-installed DIN Front/Rear-mount DIN Front-mountDIN Rear-mount Installing the GPS antenna GPS antenna Metal sheet Clamp 5 pcs When installing the antenna outside the vehicle on the body When routing the lead in from the top of the doorAfter Installing this product Reconnecting the batteryInformation Importante Sommaire Importantes Mesures DEImportantes Mesures DE Securite Branchement du système Avant de raccorder ce produit Pour éviter des dégâtsPièces fournies Branchement du système Cf. Pages 9 àEnglish Branchement du cordon d’alimentation Noir masseEnglish Français Deutsch Français Rose CAR Speed Signal Input Violet/blanc Reversegear Signal Input NON-FADING Output Français Pour relier ce produit avec une caméra de rétrovisée Veillez à utiliser le cordon-rallonge fourni. L’utilisationPour relier l’appareil vidéo externe et l’affichage Pour utiliser un écran branché à la sortie vidéo arrièreInstallation Avant de procéder à l’installation Installation de ce produit Remarques sur l’installationLes pièces repérées * sont déjà montées sur ce produit Montage DIN avant/arrière Montage DIN avantMontage DIN arrière Installation de l’antenne GPS Français Deutsch Français Italiano Nederlands Cheminement du câble sur le haut de la portière Après installation de ce produit Branchement de la batteriePioneer Corporation