DIN Rear-mount
Installation using the screw holes on the side of this product
1. Remove the side brackets.
Screw for fixing the side bracket (5 ⋅ 6 mm)
2.Fastening this product to the fac- tory
Position this product so that the brack- ets screw holes and its screw holes are aligned (are fitted), and tighten the
screws at 3 or 4 locations on each side. Use either the binding screws (5 ⋅ 6 mm) or flush surface screws (5 ⋅ 6 mm), depending on the shape of the bracket’s screw holes.
3.Attach the frame if applicable.
When attaching the frame, attach it with the grooved side pointing down- wards.
Attach the frame with this part facing down- wards.
English
Español
Deutsch Français Italiano
If the pawl
Factory radio mounting bracket gets in the
way, bend it down
Binding screw or |
|
flush surface screw |
|
Be sure to use the |
|
screws supplied | Dashboard or console |
with this product. |
Nederlands
22