Husqvarna ProFlex 21 manual Children, Maintenance

Page 12

SAFETY INSTRUCTIONS

Children

Serious accidents may occur if you fail to be observant for children in the vicinity of the machine. Children are often attracted to the machine and mowing. Never assume that children will stay where you last saw them.

Keep children away from the mowing area and under close supervision by another adult.

Keep an eye out and shut off the machine if children enter the work area.

Before and during a reversing manoeuvre, look backward and downward for small children.

Never allow a child to ride with you. They can fall off and seriously injure themselves or be in the way for safe manoeuvring of the machine.

Never allow children to operate the machine.

Be particularly careful near corners, bushes, trees or other objects that block your view.

Maintenance

Stop the engine. Prevent the engine from starting by removing the spark plug cables from the spark plugs or by removing the ignition key before making any adjustments or performing maintenance.

Never fill the fuel tank indoors.

Petrol and petrol fumes are poisonous and extremely flammable. Be especially careful when handling petrol, as carelessness can result in personal injury or fire.

Only store fuel in containers approved for the purpose.

Never remove the fuel cap or fill the fuel tank while the engine is running.

Allow the engine to cool before refuelling. Do not smoke. Do not fill petrol in the vicinity of sparks or naked flames.

Handle oil, oil filters, fuel and battery carefully, of environmental considerations. Observe applicable recyling regulations.

Electrical shocks can cause injuries. Do not touch cables when the engine is running. Do not test the ignition system with your fingers.

English-10

8010-057

Never allow children to operate the machine

8010-058

Never fill the fuel tank indoors

Image 12
Contents Rider ProFlex 18 Rider ProFlex Svenska Contents Operator’s Manual for Rider ProFlex 18 and ProFlexImportant Information Introduction IntroductionProper Service Serial NumberExplanation of Symbols Symbols and decalsXxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx Safety Instructions Safety instructionsGeneral use Keep children away from the work area Driving on slopes Do not drive down slopes with the unit raised Do as followsMaintenance ChildrenDo not smoke when carrying out maintenance Transport Presentation PresentationPlacement of Controls Throttle Control Choke LeverAccelerator Accessories Lights and power outletCutting unit Cutting height adjustment lever Lever for hydraulic lift of attachments, PFLifting the cutting unit transport position Lowering the unit mowing positionMechanical lifting lever for cutting unit Transport positionMowing position Parking brake SeatFuelling Differential lock, PF Clutch controlChronometer Driving Mowing tipsDriving Before StartingStarting the engine Impaired cooling of the engine. Risk of major engine damageDo not run the starter motor for more than Driving the Rider, PF Stopping the engine, PF English-26 English-27 English-28 Maintenance MaintenanceMaintenance schedule = Described in this manual = Not described in this manual English-31 Removing the Rider’s covers Engine coverFront cover Right-hand wing coverLeft-hand wing cover Checking the engine’s cooling air intakeTransmission cover Cleaning the engine and muffler Checking the transmission air intakeChecking and adjusting the steering cables Checking and adjusting the throttle cable Checking and adjusting the choke cableAdjusting the differential lock, PF Adjusting the hydrostatic transmission cable Cable holderAdjusting the parking brake Poorly adjusted brake can result in reduced braking abilityReplacing the air filter Replacing the air filter, PFEnglish-40 English-41 Cleaning the pulse air filter Replacing the fuel filterChecking the fuel pump’s air filter Checking the battery acid level Checking the tyre pressuresIgnition system Wrong spark plug type can damage the engineFuses Replacing the spark plugChecking the safety system Replacing the light bulbs Cutting unit components Attaching the cutting unitExercise caution Risk of crush injuries Watch your fingers. Do not turn the blades or the belt Check that the belt is around the idler Belt Sketch Cutting height ParallelismCutting unit’s service position Placing in the service positionReleasing the service position Ground pressureCutting unit model Checking the bladesRemoving the cutting unit Exercise caution. Risk of crush injuriesPull out the unit so that it catches on the outer hooks Removing the unit frame Removing the beltAttaching the belt Hook the spring to the blade brakeChanging the cutting unit’s belt Removal of BioClip Plug Lubrication LubricationLubrication schedule, PF English-60 General Lubricating the cablesLubricating in accordance with the lubrication schedule Pedal mechanism in frame tunnelChains in the frame tunnel Differential lock cable, PFEngine oil Oil is topped up through the hole the dipstick sitsReplacing the engine oil Gear lever TransmissionDriver’s seat Throttle and choke cables, lever bearings Hydraulic oil filter, change, PF Oil filter, changeParking Brake Cable Transmission oil levelEnglish-70 Trouble Shooting Trouble Shooting GuideProblem Cause English-72 Storage StorageWinter Storage Service Electrical and Hydraulic Systems Electrical systemEnglish-76 Hydraulic system, PF English-78 Technical Data Technical dataData Rider ProFlex Hydraulic System TransmissionCutting unit Combi EU Declaration of Conformity EU Declaration of ConformityEU Declaration of Conformity only applies to Europe ProFlex 18 01/901/009 ProFlex 21 01/901/010English-82 Service Journal Service journalAction After the First 8 HoursAction Date, mileage reading, stamp Signature Hour Service English-85 English-86 English-87 English-88 Action Date, mileage reading, stamp, signature English-90 Svenska ´z+H6T¶68¨ Svenska 114 02