Husqvarna ProFlex 21 manual Removing the cutting unit, Exercise caution. Risk of crush injuries

Page 55

MAINTENANCE

Removing the cutting unit

WARNING!

Exercise caution. Risk of crush injuries

1.Place the machine on a ﬂat surface.

2. Lock the brake by pressing down the pedal and locking with the push-button.

8009-328

3.Lift the cutting unit with the mechanical lifting lever.

4. Remove the front cover.

5.Loosen the belt tensioner spring.

6.Remove the belt from the front pulley.

7.Reﬁt the belt tensioner spring.

8.Hang the belt around the handle.

8009-375

8009-008

8009-009

English-53

Image 55

Contents Rider ProFlex 18 Rider ProFlex Svenska Operator’s Manual for Rider ProFlex 18 and ProFlex ContentsImportant Information Introduction IntroductionSerial Number Proper ServiceSymbols and decals Explanation of SymbolsXxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx Safety instructions Safety InstructionsGeneral use Keep children away from the work area Do not drive down slopes with the unit raised Do as follows Driving on slopesChildren MaintenanceDo not smoke when carrying out maintenance Transport Presentation PresentationPlacement of Controls Choke Lever Throttle ControlAccelerator Lights and power outlet AccessoriesCutting unit Lowering the unit mowing position Cutting height adjustment leverLever for hydraulic lift of attachments, PF Lifting the cutting unit transport positionTransport position Mechanical lifting lever for cutting unitMowing position Seat Parking brakeFuelling Clutch control Differential lock, PFChronometer Mowing tips DrivingImpaired cooling of the engine. Risk of major engine damage DrivingBefore Starting Starting the engineDo not run the starter motor for more than Driving the Rider, PF Stopping the engine, PF English-26 English-27 English-28 Maintenance MaintenanceMaintenance schedule = Described in this manual = Not described in this manual English-31 Right-hand wing cover Removing the Rider’s coversEngine cover Front coverChecking the engine’s cooling air intake Left-hand wing coverTransmission cover Checking the transmission air intake Cleaning the engine and mufﬂerChecking and adjusting the steering cables Checking and adjusting the choke cable Checking and adjusting the throttle cableAdjusting the differential lock, PF Cable holder Adjusting the hydrostatic transmission cablePoorly adjusted brake can result in reduced braking ability Adjusting the parking brakeReplacing the air ﬁlter, PF Replacing the air ﬁlterEnglish-40 English-41 Replacing the fuel ﬁlter Cleaning the pulse air ﬁlterChecking the fuel pump’s air ﬁlter Wrong spark plug type can damage the engine Checking the battery acid levelChecking the tyre pressures Ignition systemReplacing the spark plug FusesChecking the safety system Replacing the light bulbs Attaching the cutting unit Cutting unit componentsExercise caution Risk of crush injuries Watch your ﬁngers. Do not turn the blades or the belt Check that the belt is around the idler Belt Sketch Parallelism Cutting heightGround pressure Cutting unit’s service positionPlacing in the service position Releasing the service positionChecking the blades Cutting unit modelExercise caution. Risk of crush injuries Removing the cutting unitPull out the unit so that it catches on the outer hooks Removing the belt Removing the unit frameHook the spring to the blade brake Attaching the beltChanging the cutting unit’s belt Removal of BioClip Plug Lubrication LubricationLubrication schedule, PF English-60 Lubricating the cables GeneralPedal mechanism in frame tunnel Lubricating in accordance with the lubrication scheduleDifferential lock cable, PF Chains in the frame tunnelOil is topped up through the hole the dipstick sits Engine oilReplacing the engine oil Transmission Gear leverDriver’s seat Throttle and choke cables, lever bearings Oil ﬁlter, change Hydraulic oil ﬁlter, change, PFTransmission oil level Parking Brake CableEnglish-70 Trouble Shooting Guide Trouble ShootingProblem Cause English-72 Storage StorageWinter Storage Service Electrical system Electrical and Hydraulic SystemsEnglish-76 Hydraulic system, PF English-78 Technical data Technical DataTransmission Data Rider ProFlex Hydraulic SystemCutting unit Combi ProFlex 18 01/901/009 ProFlex 21 01/901/010 EU Declaration of ConformityEU Declaration of Conformity EU Declaration of Conformity only applies to EuropeEnglish-82 After the First 8 Hours Service JournalService journal ActionAction Date, mileage reading, stamp Signature Hour Service English-85 English-86 English-87 English-88 Action Date, mileage reading, stamp, signature English-90 Svenska ´z+H6T¶68¨ Svenska 114 02