DRIVING
5.If the cutting unit does not lower completely, or if the blades do not rotate, lower the cutting unit completely using the hydraulic lifting lever.
In order to ensure that the hydraulic cylinder is in the outer position, hold the lever in the forward position for a half to one second.
Differential lock, PF 21
The differential lock can be used during operation via the pedal on the left side.
In order not to get stuck, one can engage it shortly before the obstacle.
1.Engage the differential lock when necessary by pressing the pedal. If a wheel spins, let the drive pedal up a little.
2.Ensure that the differential lock is disengaged when the pedal is released. Use small steering movements or reverse a little until the pedal returns to its normal position.
Stopping the engine, PF 21
If the engine has been worked hard, it is preferable to let the engine idle for a minute so it runs at its normal working temperature when stopped. Avoid idling the engine for long periods, as there is a risk of carbon
1.Lift the cutting unit with the hydraulic lifting lever.
The unit can then be secured in the raised position if necessary by moving the mechanical lifting lever backwards to the lock position.
If the cutting unit is left in the lower position, the start lock circuit will prevent you starting the engine.
|