Husqvarna ProFlex 21 manual Trouble Shooting Guide, Problem Cause

Page 73

TROUBLE SHOOTING

Trouble Shooting Guide

Problem

Cause

 

 

 

The engine will not start.

Fuel tank empty

 

Incorrect fuel type

 

Faulty spark plugs

 

• Faulty spark plug connections

 

• Dirt in the carburettor or fuel line

 

 

 

Starter does not turn the engine

Cutting unit in incorrect position

 

Brake not applied

 

• Hydrostat pedals not in the neutral position

 

Discharged battery

 

• Poor contact affecting the battery terminal cable

 

 

connections, ignition lock, or starter

 

• Main fuse blown The fuse is found in front of the

 

 

battery, under the battery cover

 

Faulty ignition lock

 

Faulty starter

 

 

 

The engine runs erratically

Faulty spark plug

 

Incorrect carburettor setting

 

• Clogged air filter

 

• Blocked fuel tank ventilation

 

Incorrect ignition setting

 

• Dirt in the carburettor or fuel line

 

• Choking or incorrectly adjusted choke cable

 

Incorrect fuel type

 

 

 

Abnormal exhaust smoke

Black smoke:

 

• Choking or incorrectly adjusted choke cable

 

Incorrect carburettor setting

 

• Clogged air filter

 

Blue smoke:

 

• Oil mixed with fuel in tank

 

Serious engine damage

 

Thick pale smoke:

 

• Tank filled with diesel

 

 

 

The engine lacks power

Clogged air filter

 

Faulty spark plugs

 

• Dirt in the carburettor or fuel line

 

Incorrect carburettor setting

 

• Choking or incorrectly adjusted choke cable

 

Incorrect fuel type

 

 

 

English-71

Image 73
Contents Rider ProFlex 18 Rider ProFlex Svenska Operator’s Manual for Rider ProFlex 18 and ProFlex ContentsImportant Information Introduction IntroductionSerial Number Proper ServiceSymbols and decals Explanation of SymbolsXxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx Safety instructions Safety InstructionsGeneral use Keep children away from the work area Do not drive down slopes with the unit raised Do as follows Driving on slopesChildren MaintenanceDo not smoke when carrying out maintenance Transport Presentation PresentationPlacement of Controls Choke Lever Throttle ControlAccelerator Lights and power outlet AccessoriesCutting unit Lever for hydraulic lift of attachments, PF Cutting height adjustment leverLifting the cutting unit transport position Lowering the unit mowing positionTransport position Mechanical lifting lever for cutting unitMowing position Seat Parking brakeFuelling Clutch control Differential lock, PFChronometer Mowing tips DrivingBefore Starting DrivingStarting the engine Impaired cooling of the engine. Risk of major engine damageDo not run the starter motor for more than Driving the Rider, PF Stopping the engine, PF English-26 English-27 English-28 Maintenance MaintenanceMaintenance schedule = Described in this manual = Not described in this manual English-31 Engine cover Removing the Rider’s coversFront cover Right-hand wing coverChecking the engine’s cooling air intake Left-hand wing coverTransmission cover Checking the transmission air intake Cleaning the engine and mufflerChecking and adjusting the steering cables Checking and adjusting the choke cable Checking and adjusting the throttle cableAdjusting the differential lock, PF Cable holder Adjusting the hydrostatic transmission cablePoorly adjusted brake can result in reduced braking ability Adjusting the parking brakeReplacing the air filter, PF Replacing the air filterEnglish-40 English-41 Replacing the fuel filter Cleaning the pulse air filterChecking the fuel pump’s air filter Checking the tyre pressures Checking the battery acid levelIgnition system Wrong spark plug type can damage the engineReplacing the spark plug FusesChecking the safety system Replacing the light bulbs Attaching the cutting unit Cutting unit componentsExercise caution Risk of crush injuries Watch your fingers. Do not turn the blades or the belt Check that the belt is around the idler Belt Sketch Parallelism Cutting heightPlacing in the service position Cutting unit’s service positionReleasing the service position Ground pressureChecking the blades Cutting unit modelExercise caution. Risk of crush injuries Removing the cutting unitPull out the unit so that it catches on the outer hooks Removing the belt Removing the unit frameHook the spring to the blade brake Attaching the beltChanging the cutting unit’s belt Removal of BioClip Plug Lubrication LubricationLubrication schedule, PF English-60 Lubricating the cables GeneralPedal mechanism in frame tunnel Lubricating in accordance with the lubrication scheduleDifferential lock cable, PF Chains in the frame tunnelOil is topped up through the hole the dipstick sits Engine oilReplacing the engine oil Transmission Gear leverDriver’s seat Throttle and choke cables, lever bearings Oil filter, change Hydraulic oil filter, change, PFTransmission oil level Parking Brake CableEnglish-70 Trouble Shooting Guide Trouble ShootingProblem Cause English-72 Storage StorageWinter Storage Service Electrical system Electrical and Hydraulic SystemsEnglish-76 Hydraulic system, PF English-78 Technical data Technical DataTransmission Data Rider ProFlex Hydraulic SystemCutting unit Combi EU Declaration of Conformity EU Declaration of ConformityEU Declaration of Conformity only applies to Europe ProFlex 18 01/901/009 ProFlex 21 01/901/010English-82 Service journal Service JournalAction After the First 8 HoursAction Date, mileage reading, stamp Signature Hour Service English-85 English-86 English-87 English-88 Action Date, mileage reading, stamp, signature English-90 Svenska ´z+H6T¶68¨ Svenska 114 02