Husqvarna ProFlex 21 manual Maintenance schedule

MAINTENANCE

Maintenance

Maintenance schedule

The following is a list of maintenance procedures that must be performed on the Rider. For points marked with footnote number 4, turn to an authorised service representative.

● = Described in this manual.

❍ = Not described in this manual.

Maintenance	Page	Daily main-		Weekly	At	Maintenance interval
		tenance		3 main-	least	in hours
		before after		tenance	once	25 50 100 300
					a year
Check for fuel and oil leaks	-	❍
Check the parking brake	38	●
Check the engine’s oil level	64	●				●
(every refuelling)
Check the fuel pump’s air filter	42	●
Check the safety switch, seat	45	●
Check the safety switch, lifting lever	45	●
Check the safety switch, pedal system	45	●
Check/clean the engine’s cooling	33		●			●
air intake
Check the cutting unit:	50		●
• securing of the blades	52		●
• condition of the blades	52		●
(sharpness, shape, etc.)
Check the steering cables	35		●
(any play, etc.)
Check fastenings (screws, nuts, etc.)	-		❍
Start the engine and blades, listen	22		●
for unusual sounds
Clean under the cutting unit	51		●
Clean the transmission’s cooling air	34		●			●
intake
Check the battery’s acid level	43			●
Check the transmission oil level	69			●
Check the condition of belts, belt	-			❍
pulleys, etc.
Check for damage	-			❍
Check the air pressure in the tyres	43			●
(60 kPa)

English-29